0
After replacing the master cylinder and bleeding the brakes on 1991 s10 Blazer you still have problems what could it be?
Wiki User
∙ 15y ago
Check all of the wheel cylinders for any leaks. Check all of the lines for any kinks, then check the master cylinder again for any air. Air in the system may have gotten into the master cylinder and the cylinder may need bleeding again.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
The brakes on your 1999 Chevy blazer s10 4x4 stays on when you release the pedal how do you correct the problem?
Service brakes - replace Master cylinder Parking brake- either lubricate or replace cables ; I had a similar problem with my 1999 Chevy blazer, i ended up replacing the caliper and have had no problems since.
What is the order for replacing the spark plugs on a 1993 Chevy Blazer with a 4.2 liter Vortex engine?
You can replace them in any order. Just do not forget which plug wire goes to which cylinder.. The engine is a 4.3
How do you install the ignition lock cylinder on a 84 Chevy blazer?
You will need to attach the wiring harness to the end of your 1984 Chevrolet Blazer ignition lock cylinder. Slide the cylinder into the cylinder slot. Secure the ignition lock cylinder with the retaining ring.
Diagram 1999 4.3 Chevrolet blazer reg?
what is recomended when replacing timing chain in 99 blazer with a 4.3 v6
Where is number 1 cylinder for a 2.8 Chevy blazer?
The most forward cylinder on the driver's side.
Where is cylinder 1 on 6-cylinder 2002 Chevy blazer?
Drivers side, first one in front.
Chevy Blazer Electrical problems?
Chevy Blazer electrical problems can be caused by a brunt wire or shortage. For a proper diagnoses, contact a certified mechanic.
Do you have to bleed the fuel line when replacing the fuel filter on a 96 blazer with a 4.3 motor?
No
How to fix 96 S10 Blazer starting problems?
what does it do
What are the most common problems with a chevy blazer?
I did a search on google and was surpised to find that the S10 Chevy Blazer has tons of problems. The most common seemd to be with the transfer case.
1996 Chevy S10 Blazer cooling system problems?
Describe the problems you are having.
What size thermostat do you need for a 6 cylinder blazer?
195 degrees F.
