0
After the spin cycle the clothes in the washer are still soggy is it possible the spin cycle is not coming up to speed?
Do you HAVE TO SHOUT. - It's more likely that the pump is having a problem, could be something jammed in it, or it's just getting old. . Call a good handyman or an appliance guy, they will know.
----------------------------------
Yes it can be. You can check with this app the actual speed of washing machine, soggy laundry if machine doesn´t reach maximum speed
https://www.YouTube.com/watch?v=sFl9HOf2nwQ
https://iTunes.apple.com/us/app/washspeed/id588527777?l=it&ls=1&mt=8
What else can I help you with?
Why do the clothes come out of the washing machine soaking wet?
If your clothing is coming out still-dripping wet, the spin cycle is not engaging. Try using a different setting on the washer. When you hear the spin cycle begin to engage, peek into the washer and see if the drum is actually spinning. DO NOT put your hand in the machine and try and start the drum spinning. If the drum does not spin up on its own, then you need repair on the washer. You might also be over-loading the drum. Have it looked at, but it is often an easy fix.
How do I keep my washer agitator from banging loudly during the spin cycle?
To prevent your washer agitator from banging loudly during the spin cycle, try to balance the load inside the machine by redistributing the clothes. Make sure the washer is level on the ground to avoid any vibrations. Additionally, you can check that the agitator isn't loose or damaged, as this could also cause the noise.
Why does your front loading washer tear clothes?
Front loading washers can tear clothes if they get caught in the rubber door seal, drum paddles, or the gasket that holds the drum in place. This can happen due to excessive spinning, overloading the machine, using the wrong cycle for delicate items, or having loose items like straps or strings that can get caught during the wash cycle. Regular maintenance and ensuring clothes are loaded properly can help prevent tearing.
Why does your clothes come out of the washer steaming hot but you have put it on cold cycle?
The supply hoses are hooked up wrong. Hot is on the cold and since it rinses in cold, that means the last water in the tub is hot. Set the tempratue control to cold and start the washer. I bet the water is hot. Move it to hot and it will be cold. Just switch the hoses.
What does permanent press mean on a washer machine?
The "permanent press" setting on a washer machine is a cycle designed to reduce wrinkles in clothes made of synthetic or synthetic blend fabrics. It uses a combination of warm or cool water for washing and lower spin speeds to help prevent wrinkles during the wash and dry cycles.
How much water does a typical clothes washer use per rinse cycle?
40
How do i get stains out of clothes that bled in washer?
If the colors of your clothes bled in the washer, don't put them in the dryer. The dryer will set the dye into the clothes. Take the lightly colored items that were stained by the bleeding dye and put them back into the washer without detergent on a hot water cycle.
How can I prevent my washer from moving during the spin cycle?
To prevent your washer from moving during the spin cycle, make sure it is level on the floor. You can also adjust the feet of the washer to ensure stability. Additionally, avoid overloading the washer with too many clothes, as this can cause imbalance and movement during the spin cycle.
How do you get rid of the smell in clothes you left in the washer?
To get rid of the smell in clothes that you've left in the washer too long.......put your washing machine cycle on the rinse cycle, let it fill with cold water and put in 1 to 2 cups of White Vinegar. Let the clothes soak for 15 to 20 minutes and then start the cycle again so they can spin. By that time they should be ready for the dryer and your clothes will smell nice and clean.
What can you do about too much soap in the clothes washer?
If there is too much soap in the clothes washer, you can run an additional rinse cycle to help remove the excess soap. Alternatively, you can manually rinse the clothes in the sink or bathtub to remove the excess soap before running another wash cycle. Be cautious to use the recommended amount of detergent in the future to avoid this issue.
How do you get paint stains out of cloth?
If you have stains from a children's watercolor set, pretreat them and throw the clothes in the washer on a hot water cycle. Adult watercolors depend more on the concentration. If you have very dilute amounts of the paint, just pretreat and throw in the washer. If you have very concentrated paint on your clothes, rinse as much of it away as possible before you pretreat and wash them.
How does the drain and spin cycle on a washer help to efficiently remove excess water from clothes?
During the drain and spin cycle, the washer uses centrifugal force to rapidly spin the clothes, causing the water to be forced out and drained away. This process helps to efficiently remove excess water from the clothes, reducing drying time and energy consumption.
What should I do when my Kenmore washer displays the UE code?
When your Kenmore washer displays the UE code, it means there is an unbalanced load. To fix this, try redistributing the clothes in the drum to balance the load. If the issue persists, try reducing the amount of clothes in the washer and running a new cycle.
What makes your clothes smell sour when they come out of the washer?
It could be any number of things. But it is most likely due to the clothes having been left in the washer for longer than they should have been and they mildewed, or it could be that the water used has some kind of bacteria in it that makes the water itself sour.
How much Clorox do you use to clean clothes washer?
To clean a clothes washer with Clorox, pour 1 cup of bleach into the detergent dispenser and run a hot water cycle without any laundry. Make sure to consult your washer's manual for specific instructions and safety precautions.
What is the purpose of the water in the bottom of the washer?
The water in the bottom of the washer helps to create a cushion for the clothes to move around in and get cleaned effectively. It also helps to dissolve detergent and carry away dirt and grime from the clothes during the washing cycle.
What could cause a Maytag washer to stop working after a wash cycle?
Possible plugged pump.
