how do you reset the passenger side airbag on a 2000 passat?
The airbag light stays on when the computer has detected a malfunction and set a code. Clearing the code with out repairing the failure will not shut the light off.
YOU DONT BUT TO RESET THE LIGHT AFTER REPAIR GO TOWWW.VEHIX411.COM TO SEE FREE VIDEO INSTRUCTIONSI have a 2000 CRV and the airbag deployed which caused the seatbelts to lock. How do you reset them?
The air bag light is on because there is a problem with the air bag system. Until the problem is fixed the light will remain on. When the problem is fixed the light will reset itself.
Take it to your Dealer for repairs. It could be any number of sensors or the contacts in the column.
my passenger window came out of track on my 2000 323i wagon when i put it back on track i had to unbolt the passenger side airbag ,i did not disconnect iti only unbolted it now my airbag light is on,can i reset it without going to the dealer,thanks
The airbag light stays on when there is a malfunction in the system. The airbag computer will need scanned to know possible causes.
I have a 2008 frontier and as far as I know, you have to take to the dealer and pay $80.00 to reset it. I'd like to know a cheaper way to do this. ---------------------------------------------------------------------- I have a 98 and if you have disconnected part of the airbag system and turned the key on you have just set the light on. If this is the case it was very easy to reset, however if it comes on on its own, you have a problem to deal with
how to reset abs warning light on 2000 gmc Yukon
At the dash board manometer.
Take it to a professional. Working on the SRS can be very dangerous and serious injury can occur, as a premature air bag deployment can occur at any time. the light will reset itself once the problem has been fixed.
try to reset oil light on 528i bmw year 2000
If an airbag light came on after taking off and replacing a steering wheel, the person needs to make sure the steering wheel is on correctly. Otherwise, to reset the light a person can use the OBDii scanner and clear the light.
You can reset the ABS light in a 2000 Mazda 626 by unplugging the battery cables. You can also reset it by connecting a diagnostic tool to your car.
How does one reset service engine light on 2000 Nissan Quest Thanks Bill
Have the SRS repaired by a qualified technician and they will reset the light.
By having a professional repair the problem that has turned the light on. They will reset the light after the repair. This is not a DIY repair.
The light is reset with a scan tool after the repair. There is not a button.
You have a problem with the abs system. Once the problem is fixed the light will reset itself.
See Josh Zworg's how-to here: http://www.geocities.com/myintegra96/srs.html It worked for my '04 Civic. JoKing2
no reset switch in this system
Where is the airbag module on the 2000. Ford expedition
The fuse for the airbag light on a 2000 F150 is under the dash. The fuse box is located under the driver's dash.
On my Volvo (2000 S70) it means that I have it in Over-Drive or in an upper gear.
The airbag computer has detected a malfunction. You need to have the system checked for codes to know possible causes.