An Ethernet port is used for connecting your computer to a?
An Ethernet port is for you to plug in an Ethernet cable. You have your Ethernet cable plug into your Ethernet port and your Modem or Router to give you access to the internet.
An ethernet port is used for connecting your computer to a network.
The Ethernet port is used to connect a computer to a connectivity device such as a modem, router, switch,etc. Does so via an ethernet cable.
An Ethernet adapter is used for connecting two electronic devices together to share information. Ethernet Adapters allow one computer to receive the same information from another computer.
There are many cables and components to a computer. The main cables for connecting the computer would be the power cable, and an Ethernet cable for connecting a non wireless PC to the internet.
This port is used for connecting a Floppy Disk Drive to the computer.
The "Ethernet Port" Obviously is used for the Ethernet cable which often connects computers to a router. A router is a device that gets the Internet or from the phone/Internet port and routes it to your computer routers are required for ADSL and ADSL2+ to work. Oftener more than one computer is connected to the router. But this setup may be different for "Cable Internet because i have never had cable.
The VGA port is used for connecting a secondary display or a projector to the laptop
An ethernet wire
Suppose you have a computer with its Ethernet port used for a service other that internet. There is no way to combine services to the same router. how can this computer gain access to internet?
The easiest way to solve this problem: use a wireless connection. Many recent computers include a wireless NIC (network interface card), and can connect to wireless networks easily, leaving the Ethernet port free. This will only work, obviously, if this computer has a wireless card and there is a wireless network to connect to. If wireless is not an option, purchasing an additional Ethernet card will upgrade the computer to owning two Ethernet ports. One… Read More
A ethernet port is a common port on most computer / laptops and quite a few other new updated devices such as tv. This device in general households can be used to connect to the internet from a modem but more often then not wireless technology is implemented. The port in a office example is used to not only connect to the internet but also connect to the local area network which is made up… Read More
No. USB is most popular.
Sound port on a computer has sound output and input connectors. These are used for connecting a headphone or speakers (sound output) and microphone (sound input). - Neeraj Sharma
Serial port is by far the fastest port. It is so fast that it is used in modern computer to connect hard drive to motherboard. Current generation of serial port is SATA 6Gpbs.
You hook the console up to the computers ethernet port. They will both be able to be used at the same time.
A parallel port, also called Centronics or IEEE 1284 or printer port) is a type of computer interface and is used for connecting various peripherals, mainly printers or scanners. Now a parallel port is rarely used, it was replaced by an USB port.
It's an Ethernet port used for network connections.
No, RJ45 is only used for ethernet connections and can be used between your computer and any networked device, such as a cable modem or a network hub.
Hmmm... This is a question an inexperienced hacker would ask... The actual port varies by computer; there are hundreds of thousands of potential ports. If you actually own the computer you are connecting to remotely, all you need is a unique computer name, domain (if used), username, and password. The port is 3389
What is the name of the port used by an Ethernet cable what is the name of the port used by dial up modem?
Ethernet cable is RJ 45. Dial-up modem is RJ 11
A firewire port is typically used for connecting some audiovisual devices (video cameras) to a computer. It cal also be used to build a computer network (which is very rare). Now, firewire is loosing its popularity to USB 2.0/3.0 connections.
Console cable. DB4
Well, you may know that USB ports can be used for similar and same purposes as Ethernet. Really, the only hardware need is a converter. Another Answer The Ethernet ports on a computer system are supported by standard TCP/IP protocol layers, while the USB ports are supported by a serial standard. These are totally different hardware channels. I've never seen such an interface offered, but that certainly doesn't mean it doesn't exist.
The Disadvantages to a twised pair cable (AKA A Cross Over Cable): * It will require direct p2p (peer to peer) connections , e.g. straight from one computer to another (Mostly Via Ethernet or Com) * It will be incompatiable if talking to more then 1 computer by going throught a switch or hub. Cross Over Cables should only be used when one computer needs to talk to another one right next to it, or… Read More
You can connect a printer using Ethernet if the printer has an ethernet jack. If not you can purchase a used HP Jet Direct box on E-Bay for $10, which has a parallel connector that works for older printers. The printer connects to the jet direct via parallel cable, then a CAT 5 (Ethernet) cable to a hub, switch or router. If you are using Windows choose Add Printer , Local Printer attached to this… Read More
Legacy computers use I/O and parallel ports for this. Newer ones can use Firewire, double-male USB cables, and even Ethernet cables for computer to computer data transfers.
An ethernet cable is used in computer and internet connections and is available in different lengths and is also called an Ethernet Cable
Yes, that is it's purpose.
Well usb has charging capabilitys for cell phones, ipods, ect and is usually not used as an internet cable. Also most computers have a few USB ports. Now ethernet connection is used for connecting your computer to let say your router/modem to use internet. It is not used for much else at all. Hope this helped
Dvi port Edit- NOT DVI port. This is wrong in every sense of the word. DVI is used to transfer VISUAL DATA. For a monitor. You can't use it for I/O. Use an I/O port on legacy computers or a parallel port. Newer computers can use Firewire, 2-ended USB, or even an Ethernet port for computer-to-computer data transfer. I'm not in the habit of blanking answers, even if they're terribly wrong. Just so you know… Read More
Install a Web browser, if not already installed, and connect the computer to the Internet via a dial-up account, Ethernet connection to a DSL or Cable modem, or by connecting to a wireless network (using a wireless card). It depends on the hardware that your computer has which approach is best.
Phone Lines were only used to connect to the internet with 56k modem. Most people nowadays have DSL or Cable which uses the Ethernet Port on your computer.
What values are used when configuring HyperTerminal for connecting to a Cisco router's console port?
The port that is connected can either be COM1 or COM2 depending on the communication port.
ethernet cables are used to connect many items. Such as: Printer to computer, Ps3 to laptop, ps3 to router
No. An ethernet transceiver is for connecting only to ethernet cable - 8 wires. Phone wire has 4 or 6 - not enough (plus plug is too small.) You need a modem to connect to a service provider over phone lines.
You need the correct ports and cables on both your TV and your computer. The modern connection used is HDMI. There are others which can be used, however, including S-Video, DVI, analog, and even coax. Just look at the back of your TV, and the back of your computer. Find any video port that matches (not power, Dial-up, or Ethernet)
1. In terms of software, a port is a communications endpoint in a computer's host operating system. There are a lot of ports designated to communicate a computer with other computer and networks. For instance: Ports 20 and 21: FTP communication Port 22: Secure Shell (SSH) Port 80: Hypertext Transfer Protocol (HTTP) used by WWW Port 443: HTTP Secure (HTTPS) used by secure SSL web connections 2. In terms of hardware, a port is a… Read More
Port 80, when speaking of computer terms, refers to the port that uses Hypertext Transfer Transport Protocol. This is a commonly used port for any computer that has internet access by any means.
RJ45 is used with ethernet cables in computer networking while RJ11 is used in connecting telephone units.RJ45 contains more wires than RJ11and RJ45 is physically bigger than RJ11 to accommodate the extra wires
Either your phone cord, ethernet device, or a Wi-fi connection as is provided with many game consoles.
When connecting cords to the rear of a sound card and the card has a blue red yellow and black port which port is likely to be used for sound input from a DVD player sitting beside the computer?
Each sound card can be different, but usally it can be the blue port on the soundcard. If you dont have a blue port try to idenity the "line in" if you are using any TV turner software you will have to configure the software to get the sound from "line in" in the configuration. The blue port is most likely used for a microphone line-in.
"Ethernet network" is a term frequently used to describe a wired computer network using Cat-5 network cables.
An RJ45 connector is used for connecting an Ethernet network. The cable has eight pins connected to the wires and it goes into the back of the router or modem.
Of course! They are, after all, portable computers! I'm typing this on a laptop right now. You use wireless the same way you would on a home computer, and if you use ethernet cables, just plug it into the networking port on the sides of your laptop.
Ethernet Cross over cable
With the PlayStation 2, internet access can be enabled in a variety of methods, the most common of which is through a wired connection. Using the ethernet port on the back of the PlayStation 2, one can connect the PS2 system to the internet. However, if no ethernet connection is available, some third-party wireless adapters are available that can be used with the PS2 either through the USB or ethernet port.
# #* It used to be that Ethernet networks were slower than fiber, T1 and T3 lines. However, Ethernet now has the gigabyte standard, which sends information across the wires at 100 gigabits per second, which is a reasonable speed for home users with several computers networked together. Ethernet is fast enough to transfer large files across a network without waiting hours for the file to complete the transfer. #* Ethernet cables are a standard… Read More
How do you plug in two ethernet cords into one port for example my computer has one port being used to connect to the internet but Xbox live requires one also?
You don't. You'll get two digital signals trying to talk over one wire, they'll garble each other and make no sense. You'd have to buy a router or a hub.