many parts are interchangable but some dont like for example 90 crx tailights will not fit on a 88 cause the 88 crx has bigger tailights while 90 has thinner. another example is the seat ralings are different but u can use the 90 seats if u swap the railing for 88 etc.
most b-series engines from Honda only needs about + - 4 quarts.
the 2nd one from the back on the top row on the driver side kick panel
It is a very involved procedure. Get a manual on your car from the parts store or from AUTOREPAIR2000.COM
You need to go to a car parts store, and get a repair manual for your car. They cost about $16.00 Or, go to a Public Library.
It is probably not coming from inside the motor. What you probably have is a bad alternator bearing, steering pump bearing, etc.
1987 to 1990 should be similar
Body parts are basically interchangable from 1988 to 1998. Interior parts from 1988 to 1994. Engine and mechanical parts are more year specific but you'd probably be safe to assume some parts are interchangeable throughout the years. Howerver probably most likely from 1990 to 1994.
Try looking at the workshop manual http://manualfile.com/Automotive/Honda/honda-civic-1988-1990-workshop-manual.html
honda civics hatchbacks
most likely not because the 1990 is probably more advance than the 1988...
1988-1991 yz250 motors are completely interchangeable. Some parts like the cylinder head use the same casting from 1988-1996. Note: although interchangeable the cylinder ports and cylinder head combustion chamber shape differ form year to year. The optimum setup for a 1990 yz250 is a 1991 cylinder with a 1992 head.
no u cannot do that bolt pattern is different
1990 what the start of the BG body style for the Mazda 323. When it comes to the lights, 1986-87 and some 1988's are interchangable. Mid-way thru 1988 there was a slight change in the body. From that change thru 1989 the lights are interchangable. Then from 1990 thru 1994 there were the same. Otherwise, you cannot swap across those years.
How much does it cost parts and labor to replace a valve cover gasket on a 1990 Honda Accord 4door.
drive train is not able to be used as are the wiring harness and ecm, most of the other parts are interchangable. These include brakes suspension and body parts... i.e. seats and interior...loosenut...
No, the body panels are not interchangable; Mazda redesigned the 323 in 1990.; 1986-1989 are similar, with detail differences in the tail-lights and headlights and grille. Try searchign under "Images" on Google by typing the year make and model or try Edmonds.com for car facts. Cheers Malcolm
Yes. They are the same model