vans are differant then pick up trucks,And so are cars that means there are 3 differant types and lenths.
NO.. Not even close. The 4L60E is a computer controlled transmission/ELECTRONIC transmission and the 700R4 is not.
My 93 has a 4l60e. A 95 should have the same. It look like a 700r4 but it computer controlled.
Yes the bell housing should be the same. Yes the bell housing should be the same.
No simply put 2 speed powerglide= 2 gears a 700r4 has at least three and some have overdrive.
No. Bell housing is totally different. The guts of the trans are the same.
You burban should have a 4l60e in it. All this is is a 700r4 with electronics added. If the bell housing is the same it will fit but it won't work due to the electronics.
2006 caddy sts 3.6 have no dipsticks. tran sealed..good for 100000 miles, your 2005 is probably the same.
No.
yes it will I've even bolted a 700R4 on a 85 (305)
No they are not the one put behind the 2.8 has a differentbellhousing and different internals which must be upgradefd if installed behind v8 and the 200r4 as its known is normally found in 1978 mustang 2 and the bronco 2 as well
an automatic transmission for Chevy cars or trucks. it's a four speed with overdrive, so technically a five speed transmission. It's only a five speed if you count reverse. The 700r4 is a THREE-SPEED with overdrive. four forward gears. (aka 4L60) NOT the same as a 4L60E. The 4L60 is a Vacuum modulated gearbox. The 4l60E is ELECTRONICALLY shifted...
Most likely one of these 700R4 / 4L60 / 4L60E / 4L65E They are pretty much the same 1989-2005 Chevy S-10 Blazer my 1992 has the 700R4 my 1997 has the 4L60E