false
If you can connect to other computers on the same network, but you can't connect outside the network, the problem is quite often that the default gateway has not been configured correctly.If you can connect to other computers on the same network, but you can't connect outside the network, the problem is quite often that the default gateway has not been configured correctly.If you can connect to other computers on the same network, but you can't connect outside the network, the problem is quite often that the default gateway has not been configured correctly.If you can connect to other computers on the same network, but you can't connect outside the network, the problem is quite often that the default gateway has not been configured correctly.
No, computers are pretty much the same. Canada typically buys the same brand of computers as in the United States.
Yes. It needs to be the same type (MFM, PATA, SATA) as the original and properly configured. It is usually a very simple process.
D. Compression
At the DHCP server, you would create an address reservation. To do so, you need to know the host's MAC address for its network interface.
you can host it if you have a lan and have all the computers wired together if not in same building you will have to pay for your own server to create it and you have to talk to server providers about that.
It is called "IP address". A typical example, using private addresses, is:IP address: 10.0.0.5Subnet mask: 255.255.255.0Default gateway: 10.0.0.1IP address will be different for different computers, but typically all will start with the same 3 bytes, in the example, "10.0.0". Subnet mask and default gateway will be the same for several computers in the same network.It is called "IP address". A typical example, using private addresses, is:IP address: 10.0.0.5Subnet mask: 255.255.255.0Default gateway: 10.0.0.1IP address will be different for different computers, but typically all will start with the same 3 bytes, in the example, "10.0.0". Subnet mask and default gateway will be the same for several computers in the same network.It is called "IP address". A typical example, using private addresses, is:IP address: 10.0.0.5Subnet mask: 255.255.255.0Default gateway: 10.0.0.1IP address will be different for different computers, but typically all will start with the same 3 bytes, in the example, "10.0.0". Subnet mask and default gateway will be the same for several computers in the same network.It is called "IP address". A typical example, using private addresses, is:IP address: 10.0.0.5Subnet mask: 255.255.255.0Default gateway: 10.0.0.1IP address will be different for different computers, but typically all will start with the same 3 bytes, in the example, "10.0.0". Subnet mask and default gateway will be the same for several computers in the same network.
There are many sections in the circuitry of a cellphone that are configured in parallel. There are also many others, in the same phone, that are configured in series.
There is a little in the solder, but typically not much. However they typically do contain gold and other precious metals but not in enough quantity to be worth going after unless you could process a bunch at the same time.
Yes. Port forwarding is typically done in the router. However, you cannot forward the same port to more than one computer on the network.
The same kinds of things as earlier first and second generation computers had been used for, but their smaller size and typically lower cost permitted them to enter more markets finding applications where portability was critical.
The same as laptops, but typically on a desk, not a lap.