If you would like to plug a microphone into your speakers, Logitech offers a speaker with a port for a micropholne.
Altec does, the Lansing XT2 USB & AC Powered Portable Stereo Speaker
The front speakers is 4x6, and the rear speakers is 6x9.
You will need to remove the front speaker covers. The speaker covers are held in place with two retaining screws. Remove the speaker retaining screws. Remove the wiring harness from the back of the speakers. Reverse the process to install your new speakers.
Front speakers Front Door: 6-3/4" factory speaker note Far rear speakers Rear Pillar: 4x6" factory speaker note
Front speakers are 6.5" and rear speakers are 6.75". You can use 6.5" speakers for the rear deck but you will have a little trouble aligning the four screws on the spacer but it can be done. The front speakers require shallow mount speakers or the use of .75" to 1" spacers depending on the speaker mounting depth.
; Front speakers : Front Door: 6-3/4" ; Rear speakers : Side Panel: 5x7"
the front speakers are 4"x6". the rear speakers are 6"x9"
Front Speakers: 6.5" Component system Rear Speakers: 6"x9"
To remove the front speakers from a Chevy Celebrity: 1. Take out the screws from the speaker grills, take the grills out. 2. The speaker is held in with screws, remove them. Lift the speakers out of the dash and unplug the wire harness.
if a t/a came with front speaker it was mounted in the dash facing the windshield
For the front speakers in a 1993 Ford Ranger pickup truck, the left front speaker wire (+) is orange/green, the left front speaker wire (-) is black/white, the right front speaker wire (+) is white/green, and the right front speaker wire (-) is black/white. For the rear speakers, the left rear speaker wire (+) is pink/green, the left front speaker wire (-) is pink/blue, the right rear speaker wire (+) is pink/blue, and the rear right speaker wire (-) is green/orange.
* == ; Front speakers : Front Door: 6-1/2" ; Rear speakers : Rear Deck: 6x8 http://www.crutchfield.com/S-96jByR9lvTK/app/car/mycar.aspx
Remove the speaker covers, by loosening the retaining screws. Remove the speaker retaining screws. Remove the wiring harness. The speakers will come out.