They are very good, but they may require the assistance of a professional body piercer to get them put in at first.
Properly done nostril piercings don't have backings on them (those with backings are not proper nostril piercings and were done with a piercing gun) they are of a screw design to prevent them from being snagged and pulled out by accident. You need to twist the nostril screw around till you can see the bottom of the screw portion inside your nostril, grasp the top of the nostril screw and gently pull down toward the edge of your nostril, then simply twist the screw until the jewellery comes out of the piercing. If you are still having issues see your local professional body piercer for assistance.
earring studs
The front wheel hub on a 1994 Honda Civic is connected to the upper control arm and lower. Remove those as well as the axle. Also remove the brake caliper, rotor, and pads. The hub will come off and the studs will then be able to be reached.
SNOT (or "studs not on top") is a method of LEGO construction that involves manipulating the blocks so that not all the studs (those knobby pieces on top) are facing upwards.
once the wheel is off you may see 2 screws those have to be removed before you get the rotor off, i suggest buying a impact screw driver ($20-30), put the right size bit on the driver and hit the back of the screw driver with a hammer while turning the screw driver counter clockwise if it doesnt come off you can hit it while turning the driver clockwise to help loosen the screw then clockwise once those are off the rotor comes out
unfortunately, no, ... even though all those hard earned studs SHOULD be kept . :(
If a screw is stripped, you can try using a rubber band or a screw extractor to remove it. If those methods don't work, you may need to drill out the screw and replace it with a new one.
If you strip a screw, you can try using a rubber band or a screw extractor tool to remove it. If those methods don't work, you may need to drill out the screw and replace it with a new one.
If the screw is stripped, you can try using a rubber band or a screw extractor tool to grip and remove it. If those methods don't work, you may need to drill out the screw and replace it with a new one.
?? Put a back on a nose ring ?? Well for those of you who got your nostril piercing done by a piercing gun, I would say you should go an see a professional body piercer and get the proper jewellery for your piercing. All professionally done nostril piercings are done either with a captive bead ring or a nostril screw, both pieces of jewellery designed to stay in place on there own without "backings". Now leaving the ear stud in your nose is not a good idea and stuffing a free floating earring back up your nose has risks all of it's own should it come free at night. Get the right jewellery for the piercing, go see a professional body piercer.
NOTHING SCREW THOSE PIECES OF SHlT.
NOT hooked earrings, those can be dangerous and not ideal. You should wear some simple studs.