"Force the substance into a smaller volume" is pretty much the definition of "compress".
When a gas is compressed, so volume is decreased, the pressure increases. P=1/V
The volume decrease only when the external pressure increase.
- if the cylinder is sealed by welding, the same volume- if the cylinder is open - any initial gas
Charles's Law
Compressed natural gas is natural gas under pressure which remains clear, odorless, and non-corrosive. This is when natural gas is compressed to less than 1% of its volume at standard atmospheric pressure.
The volume will increase as the piston moves downward. If the cylinder is sealed and the gas can not escape, the pressure in the cylinder will decrease. If the cylinder has a small opening as in a motor, the higher pressure outside will push in air that will mix with fuel to ignite when the spark plug is fired. (Supv note: it is not possible to have negative pressure. You can have zero pressure but not a deficit.)
As pressure increases, the molecules of the gas are compressed, reducing the amount of space between molecules, which results in a decreased volume.
If the gas is compressed into the cylinder, yes. However if the gas is already pre-compressed (to the point of liquefaction) and simply decanted into the cylinder, there will be little to no heating of the receptacle cylinder.
For a fixed mass of gas, the gas will become compressed by pressure and its volume will decrease. This is why pressurized gas containers explode when breached: the container breach eliminates the barrier between the gas compressed by the container and the outside air; the pressurized gas immediately increases the volume it occupies in the explosive decompression until its density equals the density of the regular atmosphere.
Yes, a gas can be easily compressed.
The compression will result in a lowering in the average distance between molecules of the gas. Imagine that the cylinder is like that in an internal combustion engine, with a piston inside the cylinder. The compression is accomplished by pressing the gas into a reduced volume. The number of gas molecules remains the same. With the same number of molecules in a reduced volume, the gas molecules are pressed more closely together, lowering the average distance between the gas molecules.
1945
ya its possible now we suppose the example of adiabatic process in this process when we compressed the gas in a cylinder rapidly the volume varies and there is no transfer of energy and mass
decrease
no it's a gas, compressed to around 1% of normal volume. If it was compressed to the liquid state, you'd call it liquified natural gas (LNG).
When a gas is compressed, so volume is decreased, the pressure increases. P=1/V
The volume decrease only when the external pressure increase.