0
40 psi for 10 min.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What is the maximum pressure of a 1.250 pipe?
depends on the pipe like if its copper its rated at 300 psi 200 degree F pvc is rated at 200 psi schedule 40 if its black poly it would be 200 psi most all pipes have it on the side of the pipe ,pressure and degrees.
What is the maximum pressure per schedule for GI pipe?
The maximum pressure per schedule for GI pipes varies. For instance, a schedule 40 for a black poly pipe would be 200 psi.
What is the volume of a pipe that is 10mm diameter and 200 meters long?
The volume of a pipe that is 10mm diameter and 200 meters long is: 0.015708 m3
How much water is in 200 feet of 1 14 copper pipe?
how many gallons of water are in 200 feet of 1 1/4 pipe
What is the internal diameter of DN225 AC pipe?
200
Is 200 psi of air the same as 200 psi of water?
Yes pressure is pressure
What is the weight per meter of 200 dia pipe?
That would depend entirely on - what material the pipe was made from !
Can you get you half pipe for less than 200?
Yes. Though it may depend on the units for the 200.
How many animals are tested on per month?
There have been roughly 100 to 200 animals tested per month.
How much should it cost to have a new exhaust system installed on a 95 Camry?
It really depends on what it needs. Is it just a muffler? An Intermediate Pipe? Front Engine pipe? Converter? If it only needs a muffler... $200. If it needs a muffler and Intermediate pipe...$400. Best to have it looked at to be sure. PaulMidas of Dartmouth
Are pipes measured on the inside?
both ID inside diameter and OD outside wall thickness is determined by sch 40 ect the higher the number the thicker the wall pressure pipe should be a higher rating c900 PVC can go to 200 psi ductile and steel up to 600 psi non pressure pipe is a sch 35 usually
The lowest tone to resonate in an open pipe of length L is 200 Hz what frequencies will not resonate in the same pipe a 400Hz b 600Hz c 800Hz d 900Hz?
The answer would be d 900Hz, because it is 900 is not 200 does not go into 900 evenly. The pipe will resonate a frequencies that 200 will go into evenly.
