Can be safe are two diferent things.
Some can be used as slow as 50kmph (30mph) most will not work below 60Kmph (40 mph)
Some will set as high as 160 kmph (100mph)
It is not recomended that you use cruse control in urban trafic, under heavy freeway trafic conditions, poor traction and poor visiblity conditions.
Be safe.
No. The cruise control will maintain the vehicle speed you have selected.
When you get to speed you want to keep, press the button to activate cruise control. You will on the dash light showing that cruise control was activated. After that pull the cruise control joystick down to set the speed. If you pull toward you it resets the current speed.
To use the cruise control on the PT Cruiser, turn the cruise control on in the steering wheel. Accelerate to the desired speed and push in the end of the left turn signal knob. The cruise control should then control the speed. To take the car out of cruise control, a person can tap the brake.
Speed control is Chrysler's name for cruise control. The speed control relay on your Wrangler supplies power to the vacuum servo for the cruise control. This servo opens or closes the throttle plate in the throttle body based on commands from PCM when your cruise control is set.
cruise control
The ECU has a cruise control speed limiter that will not allow the cruise control to be set after that speed has been exceeded.
Speed 2: Cruise Control
yes, its called cruise control
Yes it can. It will add throttle to match what speed it was set too.
Control Car is another name for cruise control. Cruise control allows you to set a speed and your car stays at that speed. It is good for being on the highway. It also conserves gas.
Depends if you are turning or going straight. Assuming your cruise control keeps the vehicle at a constant speed.
There is not a fuse for the cruise (or speed) control on a 2008 Ford F-250.