0
What else can I help you with?
Suppose you have a lan consisting of a 100baset hub 2 computers with 10baset nics and a computer with a 10100baset nic at what speed would this lan operate?
It will operate on the speed corresponding to the slowest element in the network (in your case).
Suppose you have a lan consisting of a 100baset hub two computers with 10baset nics and a computer with a 10100baset nic at what speed would this lan operate why?
Max. 10 Mb per s. Because hubs will operate at the speed of the slowest connected device.
Routers operate at layer LAN switches operate at layer Ethernet hubs operate at layer?
Routers operate at layer 3. LAN switches operate at layer 2. Ethernet hubs operate at layer 1.
Why WAN link speed is way less than LAN speed?
why the lan high speed than wan
What is the speed of LAN?
LANs typically range in speed from 10 Mbps to 1 Gbps, although some newer LAN technologies are boosting the speed to 10 Gbps at least.
What is the maximum bandwidth of LAN?
LAN Bandwidth is the bandwidth (Maximum speed) of the Local Area Network
Why used gigabit Ethernet lan?
You would use gigabit ethernet in a LAN where you want speed; otherwise, most LANs run at 100 megabits per second, which is considerably slower.
Which is faster LAN or USB?
LAN is a networking concept that can be achieved at any speed. USB is a bus interface.
What is the maximum speed the plow can operate at?
The plow can operate at a maximum speed of 25 miles per hour.
Does a lan need isp?
A Local Area Network (LAN) does not necessarily need an Internet Service Provider (ISP) to function. A LAN can operate independently for internal communication and resource sharing among connected devices. However, if the LAN requires access to the internet, then it needs to connect to an ISP.
What memory modules can be installed at a 333MHz bus speed and operate at that speed?
DDR SDRAM memory modules can be installed at a 333MHz bus speed and operate at that speed. Specifically, DDR400 (PC3200) memory modules typically operate at 333MHz bus speed.
How do you change LAN speed from 10mbps to 100mbps?
In order to get a higher speed from a LAN you must ensure that the cabling, all network connectivity devices (switches, etc) and NICs are capable of that higher speed. In other words, you may also have to upgrade your equipment for a higher speed.
