S0
True.
decentralization
The exterior lighting is computer controlled. You need to have the under hood computer, called a TIPM, checked for codes. If it thinks it sees a short circtui it takes the power away.
I assume you're using Microsoft Vista on your computer. Also, it depends on your definition of "shut down". Is it "Sleep" mode or really a real actual "Power Off" shutdown? or "Hibernation" mode? The most probable reason is that your computer is set to "Hibernate". This normally kicks in when your computer is running on battery mode (ie, a notebook) when you're away. After x minute (depending on settings), your computer will go into hibernation; to know if you were hibernating; switch on the PC; if the computer boots up to the same exact state when you left it (ie, all the programs were still running and data available), then you were in either hibernation mode (I assume it is not in sleep mode) Click the Start button > Control Panel > Power Option > Change Plan Setting You will be able to change the way your computer behave from there. It will be good to know if your computer is still connected to the power (is your power still on?) when you're away. This affects when/if the Hibernation mode will kick in. Good luck!
take away the computer or turn off the internet and go to the power sorce and turn off all the electicity in your house
The power to walk away
It retains the data after power down. Removable magneitic media allows you to remove the meduim from the computer, file it somewhere away from the computer, and retrieve the data it stores at will.
state politicians who wanted to keep the power and fear that a central government would take it away.
Only when the computer is booted and your application is loaded. Ram is "volatile", meaning that everything goes away when you turn off the power.
The 17th Amendment changed the appointment of senators, taking power away from the state governor and turning it over to the citizens of the state.
You wouldn't have your computer.
This usually indicates that the power supply is low feeding the ABS computer. Check for good grounds and power connection.