Higher compression ration which can increase hp. I installed 49cc heads on my 305 instead of the 64cc and got a higher compression ration and a fair amount of hp gain.
Yes they will, but 305 heads have a smaller combustion chamber so it may raise your compression ratio.
The headers for a 350 and 305 are the same.
Yes, and well.
Possibly if Chevy made a 300.
the block & heads are the same you just have to pull the 305 out & put the 350 back in
305 heads of course, 350 heads will fit for sure and possibly 400. obviously no big block heads will fit. a 305 with 400 heads gets you a little over 352. 350 with 400 heads is a 383. add and divide
No. The bore size is different between a 305 and 350. The 350 bore size is larger.
In the cylinder heads.
take them to a machine shop
no I respectfully disagree. I am running 305 Chevy TBI heads on my 1971 Chevy 307 and all is very well.
yes the heads will bolt right on but if you are putting a 305 in there the flywheel is different in the sense that the 327 has a small hole where the flywheel meets the crank (you need the starter for the 305)
Yes, they will work. but you wont gain power because the little 305 isn't putting out enough flow to keep up with the heads