Brake fluid is measured in PSI (pounds per square inch) where the force applied to the piston itself is measure is lbs.
In US Standard units, volume is measured in fluid ounces, cups, pints, quarts, and gallons. In metric units, volume is measured in liters.
In US Standard units, volume is measured in fluid ounces, cups, pints, quarts, and gallons. In metric units, volume is measured in liters.
Flow of a fluid is measured by its viscosity. Units of measure may be in unit volume per unit of time
Because a perimeter is measured in linear units while an area is measured in square units.
No, volume is measured in cubic units, area is measured in square units.
If you refer to the units, energy is measured in joules.If you refer to the units, energy is measured in joules.If you refer to the units, energy is measured in joules.If you refer to the units, energy is measured in joules.
It uses brake fluid in the brake fluid reservoir. The clutch fluid (brake fluid) is fed by the brake fluid reservoir. The clutch fluid reservoir is just beneath the brake fluid reservoir. So, add fluid to the brake fluid reservoir to fill the clutch fluid, also.
The length, width, or height of a solid figure is measured in units of length. The area of the figure's outside surfaces is measured in squared units of length. The volume of space filled by the figure is measured in cubed units of length. The mass of the figure is measured in units of mass. The weight of the object is measured in units of force. The age of the figure is measured in units of time. etc.
In the International System of Units (SI Units), time is measured in seconds.
The units are horse-power. One horse-power = 550 ft.lbs/sec B.H.P. stands for brake horse-power. The word brake does not affect the units, it simply specifies the way in which the horse-power was measured. This in turn means that the horse-power wasmeasured rather than calculated or estimated.
Fluid goes into the reservoir on the master cylinder, the master pushes the fluid down the brake lines (as you press the brake pedal) to the hydraulics at the wheels. In between you could have metering valves, abs units, "t" connections & ride height sensing valves depending on the system.
Area is measured in square units. Volume is measured in cubic units.