brake lgiht fuse blows when shifting gears?
its gotta be a ford a problem with the center brake light circuit causes the lights to go out i believe it is a diode
If you have the same bulb for brake and signal, brake light power needs to be interrupted by the signal lights, The brake circuit has to go through the signal light switch so the problem could be there.
tail lights circuit
You need to check the brake light switch if the bulbs are good. They had a problem with the circuit boards that the bulb are inserted in. If none of these are the problem then if you do not have a short, your turn signal switch is bad.
The brake light is on because there is a problem with the brake system. Until the problem is fixed the light will remain on. Once the problem is corrected the light will reset itself.
There's a switch on the brake pedal that when you step on it, it completes the circuit for lighting up the brake light.
A short in the Brake light circuit? Bad brake light switch?
Stuck brake light switch, or a short to power somewhere in the brake light circuit.
short in brake light switch located on brake pedal
They aren't. The brake light circuit is not connected with the headlight circuit.
The tail light circuit is separate from the brake and signal light circuit. So, check the fuses, check the bulbs, check the sockets and if you haven't found the problem yet, check the wiring.
Check for a short in the brake light circuit. A dead short will dim lights & blow fuses. Have you checked the charging system & battery? Pull the fuse for the brake lamp circuit & see if the same problem still exists.