usually depends on the type of vehicle that you are driving. if it is equiped with a third light and it works then it will either be the rear bulb assembly or the problem is under the dash board in the wiring. please check these and get back to me and i will walk you thru the process of fixing them
brake lights dont work
change the brake lights check the fuse check the brake light swtch
replace brake light switch on brake pedal
Check the fuse, the bulbs, and the brake light switch.
Brake pedal switch, wiring, bulbs, bad trailer harness (if there), fuses...
all my lights work except my break lights, when i push on the peddle they dont go on can you help me?
i got a 2006toyota highlander my tail lights dont work but,every other light works please help me
Did you replace the fuse? have you checked the circuit board well the lights go on cause they tend to short out often
my back brake lights don't work, but the brake light on the back door does what could be wrong
Check the brake light fuse. If you have 12 volts at the brake light switch I would suspect the signal light switch is at fault.
I am having the same trouble. My brake lights work with the light switch for nighttime driving, but only far right brake light works when i pres brake pedal. Reverse lights dont work at all. Turn signals and hazard light work.
If the headlights are on and brake lights work but not the tail lights, it is possible there is a short in the electrical wires. Another cause for this could be that the tail light bulbs are burned out. Most vehicles have more than one bulb inside the tail lights to control different lights at the same time.
yes my brake lights dont work First check the fuses, then check the bulbs then check the brake light switch
Check the brake light fuse first. Then check for a bad brake light switch at the brake pedal.
Have an electrician check the wiring that goes to the brake lights in the trunk of the car.
The brake lights and the tail lights are separate circuits. Check the brake light fuse, then check the brake light bulbs, then check the brake light switch.
First things first you need to check your fuses. In the owners manual you will find the location of the fuse that relates to the brake lights. Take the fuse out and hold it up to see if the connection is broken if it is replace and the brake lights should work.
The most likely cause is a bad brake light switch (if none of the brake lights illuminate) but if its only one of the brake lights, try changing the bulb. Even if they still work as running or turn lights because they have a double filament and may still work partially, but not as brake lights.
it could be that your brake light switch under your dash that sits right on top of your brake pedal has gone out
Check the fuse, check the bulbs, check the brake light switch, in that order.
Check the: Bulbs Fuse Stop light switch
Brake lights and turn signals are on a separate circuit from the tail lights. Tail lights are on the same circuit with the dashboard lights. If the dashboard lights aren't working either, check the fuse. If they ARE working, check the headlight switch.
check the fuse for the brake lights, they have thier own. also check the brake light switch at the at the top of the brake petal
The 2001 Chevy Blazer brake lights may not work and the third bake stays on because the current light needs to be replaced. A replacement brake light can be purchased at an Auto Parts store like Pep Boys.
How do you replace brake lights