Brake switch needs replaced.
i have tail lights but do not have brake lights nor do i have turn signals. i have replaced brake switch and all bulbs
Out of adjustment. Adjust the mounting of the switch so the brakes lights are off until you press the brake pedal.
"Stuck" brake lights indicate that the brake light switch on the brake pedal is broken. It should be replaced.
The brake lights won't turn off because the brake light switch on the pedestal of the brake pedal needs to be replaced.
The BOO (Brake On/Off) Switch may need to be replaced. If it is bad, it would cause the brake lights to NOT illuminate when the brake pedal is applied.
Check the brake light fuse. If you have 12 volts at the brake light switch I would suspect the signal light switch is at fault.
If you have the same bulb for brake and signal, brake light power needs to be interrupted by the signal lights, The brake circuit has to go through the signal light switch so the problem could be there.
check fuses & brake lights switch located on brake pedal
The turn signal switch overrides the brake light circuit while the turn signals are on. If the switch is damaged or worn out the brake lights won't work.
check the wires at brake light switch on brake pedal they are bad about breaking brake light switch
Check the brake switch at the pedal.