While this may not be the answer for your specific problem, many times British electrics are unreliable. Disconnect the switch from the mounting bracket and see if it sticks without the pedal trying to work it.
Another common problem is wear, many switches have adjustments and as the plunger wears, the switch has less and less travel, eventually causing brake lights to come on unexpectedly.
Finally, it is not uncommon for debris to get into the pedal or linkage, or the return spring to come off or break, when that happens pedal travel can be restricted as the pedal will not return to the proper rest position. This is VERY BAD since sometimes it can prevent the brakes from releasing, causing premature wear, poor fuel economy or brake overheating leading to failure.
Pry the the unit holding bulbs away from the car by squeezing and levering from the top.
115 or 131 according to the type and year of production
How do i time rover 75 v6 engine/
Rover 75 Under bonnet fuel pump - WQB100482 - Roughly £180 Rover 75 Under bonnet fuel pump - WQB100482 - Roughly £180
Hi just doing my rear discs and it needs a T50 to remove the screw, hope that helps
Looking face on to the engine, there is a plastic cover just below the windscreen on the left. The cover is lifted by pressing two clips in. The brake fluid reservoir can be found here.
in my opinion yes, i got my 75 rover a while back and it still works perfectly
where is the parking buzzer located in the rover 75 .its somewere in the front but i cant find were as it has stoped working
yes
where is the parking buzzer located in the rover 75 .its somewere in the front but i cant find were as it has stoped working
The height of the 2006 Land-Rover Range-Rover is 6 ft. 3 in. (75 in.).
you can find the sump plug in rover spares department.