Compare Sound power, Sound pressure, and Sound intensity. All share as level the same unit of measure: the decibel (dB). The term "sound level" is commonly substituted for each. As characteristic impedance of air we use the round value Z = 400 N·s/m³ (Pa·s/m). Then the "sound level", that is the sound pressure level Lp and the sound intensity level LI is exactly the same as a decibel value.
The sound power or acoustic power is the sound energy constantly transferred per second from the sound source. A sound source has a given constant sound power that does not change if it is placed in a different room environment.
Sound power is a theoretical value that is not measurable. It is calculated and expressed in watts and as sound power level LW in decibels.
A sound source produces sound power and this generates a sound pressure fluctuation in the air. Sound power is the distance independent cause of this, whereas sound pressure is the distant-dependent effect.
Sound power level is equal to sound pressure level and intensity level at a distance of r = 0.2821 m from the source at full sphere propagation. See related Link.
Sound power or sound intensity I is a sound energy quantity.Sound pressure p is a sound field quantity.Sound intensity is sound pressure squared. I = p².See related link.
Given: Power P = 100 W. Reference power Po = 10^−3 W = 1 mW. Reference power level LPo = 0 dB. Get power P when entering power level LP: P = Po×10^(LI/10) W = 10^−3×10^(LP/10) W. Get power level LI in dB when entering power P in W. LP = 10×log (P / Po) dB = 10×log (P / 10^−3) = 50 dB. The reference power may be different, then the power level will be different.
Your ears and the sound pressure level meter "measure" the sound pressure of a sound wave. Sound intensity is measured in watts per square meter.Intensity is measured in watts per square meter.Note: Sound power (sound intensity) is the cause -and the sound pressure is the effect.The effect is of particular interest to the sound engineer.
There is no nice and easy formula to calculate what is being asked. Turbines and generators will have different efficiency curves. Nothing was mentioned about the pressure of the steam in the question. As the temperature and pressure of the steam rise, a pound of steam will contain more energy that can be used by the turbine. In general, though, 20,000 to 25,000 pounds of steam an hour flowing through a plant will give one megawatt of production. It is important to note this is for a power plant. The residential geothermal energy that is being used in houses is not a suitable energy source for power production.
formula are given at www.calculatoredge.com
Sound power level is equal to sound pressure level and intensity level at a distance of r = 0.2821 m from the source at full sphere propagation. See related Link.
If you multiply kVA by Power Factor (Ranges from zero to one) you get watts which is effective power.
50,000 pounds per hour how much horse power
Sound power or sound intensity I is a sound energy quantity.Sound pressure p is a sound field quantity.Sound intensity is sound pressure squared. I = p².See related link.
P = E * I Power (watts) equals voltage (E) times current (I)
"Sound power" and "sound pressure" are two distinct and commonly confused characteristics of sound.Sound power is the acoustical energy emitted by the sound source, and is an absolute value. It is not affected by the environment.Sound power levels are connected to the sound source and are independent of distance. Sound power levels are indicated in decibels.Lw = 10 log (W / Wo)where:The reference power is 10-12 watts (W), which is the lowest sound persons of excellent hearing can discern. Sound power is measured as the total sound power emitted by a source in all directions in watts (joules per second).Since sound measuring instruments respond to sound pressure the "decibel" is generally associated with sound pressure level (SPL). Sound pressure levels quantify in decibels the intensity of given sound sources. Sound pressure levels vary substantially with distance from the source, and also diminish as a result of intervening obstacles and barriers, air absorption, wind and other factors. Sound pressure levels are indicated in decibels.Sound pressure level (SPL) Lp = 20 log (p / po),where:The reference sound pressure is po = 2 x 10-5 pascals.The usual reference level po is 20 x 10-6 pascals = 20 micropascals.Sound pressure is a pressure disturbance in the air whose intensity is influenced not only by the strength of the source, but also by the surroundings and the distance from the source to the receiver. Sound pressure is what our ears hear and what sound pressure level meters (SPL meters) measure.
Providing you calculate any back pressure lost and compensate for it.
as more pressure is given by the steam
The equation Force = pressure x surface of the cylinder Electric power and torque and power you need to know what you want. After obtaining the surface area of ​​the circle diameter cylinder, the cylinder can get.
A no load voltage means the power level that is giving from the output pins power converter. This is when 0% load is given.
True