0
5
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How do acid equals base buffer systems minimize pH?
They maintain (or at least come close to maintaining) a CONSTANT pH. That is pH staying close to its original value. Buffers are most needed at conditions ranging from weakly acidic to neutral and weakly basic, because most biochemical reactions are in that range and there is almost no buffering power in natural water with the pH range 4 till 10.
What is the pH of a solution prepared by mixing 2.0 ml of a strong acid solution of pH 3.0 and 3ml of a strong base of pH 10.0?
ph 3= [H+] = 1 x10^-3 ph 10 = pOH = 4 = [OH-] = 1 x10^-4 2 x (1 x10^-3) = 2 x10^-3 mmol H+ ions = 0.002 mmole 3 x (1 x 10^-4) = 3 x10^-4 mmol OH- ions = 0.0003 mmole H+ > OH- so subtract to get remaining OH- 0.002 - 0.0003 = 0.0017 mmole H+ find concentration [H+] = mmole H+ / ml solution = 0.0017 / (3+2) = 0.00034 M H+ now find pH pH = - log [H+] = - log(0.00034) use a calculator to find the answer.
What is the pH of dried cranberries?
the pH of cranberries is 4.
Is HCOOH and HCOONa a buffer?
Yes, in a 1:10 dilution of Na2CO3, and NaHCO3, the buffer capacity for basic solutions is 7E-4 and for acidic solutions, 1.2E-01
What is the pH of hot tea?
The pH of tea is 3-4.
How you standardize pH meter?
Standardize the pH meter using a buffer solution of known pH value.Basically take buffer of pH value 4.Then set zero reading in the pH meter.Now remove unknown buffer solution.(take care with atmospheric temperature.)
Is the buffer supposed to keep the pH of a solution at 7?
Some buffer solutions maintain pH at 7, but others have different pH values. It is common to have buffers with pH values of 4, 7, and 10 for calibrating pH meters, for example.
How do you calculate from scientific notation to pH?
take the negative logarithm ex. 10^-4 has a pH of 4
The normal pH of rainwater in some areas of Michigan is between 4 and 5. The lower peninsula has a natural buffer in the water and soil. what is this buffer?
chalk, calcium
What is the difference between NIST buffer solution and USA buffer solutions?
When setting up your pH meter you need to specify that the standard solutions are NIST, USA, China or Custom standards. Typically pH meters will automatically identify the pH 7 buffer standard as 6.86 for the NIST selection and 7.00 for the USA selection. The pH 4 buffer standard value will be identified as 4.01 for the NIST selection and 4.00 for the USA selection. The pH 10 buffer standard value will be identified as 9.18 for the NIST selection and 10.00 for the USA selection. A "Custom" selection on your pH meter will allow you to make your special selection of the standards you want to use. Read the calibration meter set up section of your pH meter manual and check your pH buffer standard labels to ensure you match your pH meter set up to the standards you intend to use.
Is a buffer supposed to keep the pH of a solution at 7?
Some buffer solutions maintain pH at 7, but others have different pH values. It is common to have buffers with pH values of 4, 7, and 10 for calibrating pH meters, for example.
How do you Calculate MF in 3-Ph 4 wire energy meter?
how to calculate m.f. of energy meter 3 phase 4 wire h.t. & l.t.
How do you prepare phosphate buffer solution of pH 8?
See the Web Links to the left of this answer.I especially like the Smith.edu link -- it has complete and very useful description of how to prepare a buffer.Use the Henderson-Hasselbach equation:pH = pKa + log [A-]/[HA]where HA is the protonated form of the weak acid, A- is the salt (dissociated acid, or in other words, its conjugate base), and the pKa is the strength of the acid.What this says is that the pH that you want your buffer to be depends on two things:-- the pKa of the weak acid you are using (see reference tables under the Web Links to the left)-- and the RATIO of the concentration of the acid and the salt that you add to the solution.The pH of the buffer does not depend on the actual concentration of the buffer, but on the ratio of the two parts.The buffer capacity depends on two things -- how close to the pKa the pH of the buffer actually is (it should be within 1-2 pH units), and what the total concentration of the buffer is.For instance if you have 0.001 M acetic acid and 0.001 M sodium acetate, the resulting buffer will have the exact same pH as a buffer made with 0.1 M acetic acid and 0.1 M sodium acetate (because the ratio is 1 to 1, the pH = pKa = 4.76). However, the 0.1 M buffer will have a much larger buffer capacity, and will much better resist changes in pH upon the addition of a strong acid or base.
Compare solutions 2 and 4 how does the common ion effect influence the pH of solution 4. explain fully and calculate the expected pH of each of these solutions?
pH contribution only comes from dissociated H+ / OH- Common ion effect affects the kDiss calculation used to calculate the H+ conc
How tall is Ray Buffer?
Ray Buffer is 6' 4".
What is the most efficient way to make up a HEPES buffer at pH 8.5 What starting compounds and reagents will you use?
You will need to purchase the HEPES powder and then you have to mix with desired amount of sterilized destilled water and check for the pH, if too low you can add KOH or NaOH, and if its too high u can add HCl until desirable pH you want. Then Filter sterile the solution, cover the bottle with Aluminium foil and store at 4 degree. For 500 ml 1M HEPES buffer, I had to add at least 10 ml 10N NaOH or KOH to bring the pH up towards pH 8.5
How much stronger is pH 9 than pH 4?
pH 9 - pH 4 = pH 5 It is stronger by 5 pH.
