0
Can you substitute 12V. AC 40va Transformer for 12V. AC 1000ma. Home service-out door fountain?
Wiki User
∙ 13y ago
Yes, the output current of a 40va transformer at 12 volts is 3.33 amps. The replaced unit had an output of 1 amp making it a 12va transformer. By doing this exchange there will be three times the capacity of the new transformer over the old transformer.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Can you replace a transformer with an input rating of 120VAC 60Hz 12W and output rating of 12vdc 500mA with one that has an input rating of 120vac 60hz 25w and an output rating of 12VDC 1A?
Yes, you can. Here's why. If a supply's output is rated at 12 volts DC (12 VDC) and 500 milliamperes (500mA), it can deliver a maximum of 500mA at the 12 volt rating. You want to use a 12VDC supply that is rated at 1A (1000mA). That means that the supply is capable of delivering up to 1A at 12VDC. Now the crux of the matter. Your device, that's the load on the supply, needs 12VDC to operate. Your replacement supply is rated at 12VDC. No problem. Your supply delivered a max of 500mA. That does NOT mean that your load, that thing you're powering up, actually uses all 500mA. Your load knows how much current it needs to draw. Your supply has to be rated for more than that. Your supply was rated at 500mA. It worked well. The supply you wish to use will deliver a max of 1A (1000mA). It will easily supply the current your load will use. Oh, and the polarity of the new supply must be the same as that of the old one. That's pretty obvious. Always be safe and consult an electronics specialist for electrical questions. There are a number of savvy folks working at consumer electrical outlets who can get you up to speed.
Can you use a 9v dc 1000ma adaptor for a device that has 'power input' of 15v dc 800ma?
A: Disregarding the fact of different voltages there is the power to be concerned 9v x 1A = 9W, 15V X .8 = 12W. THE DEVICE WILL BE UNDER POWER.
How do the milliamp ratings of LEDs 20ma and a 12 volt 1000ma power supply figure into the resistor equations or do they not?
A: Since you know the current flow you need the voltage drop for this particular led at 20ma. All LED require a current and voltage to operate properly assuming a voltage drop of 2v then for a 12v source it becomes 12-2=10v 10v/.02=500 ohms in series to limit the current is required
What AC adapter do you need for your Trek 2200 recumbent stationary bike?
UPEXX Plug In Class 2 Transformer Model No: AM-61000 Input: 120VAC 60Hz 15W Output: 6VDC 1000mA
What ac charger should be used for versalite 1.5 million candle power spotlite?
Here is the information that I got off mine: Class 2 Transformer 13VDC 1000mA Model: SADC-0891 The plug that goes into the spotlight is 5mm
Does 1000mA equal 1A?
Yes. mA means milliAmperes. one milli is one/one thousand so 1000mA is 1 Ampere
What is 0.7 mA?
mA = milliAmperes 1000mA = 1 A
Will a 5.0v 1000mA charger, charge 5.0v 2.1A device?
no
For a device requiring DC 6V 1000mA will a DC adapter output 9V 1000mA also work for this device?
A device which requires 1000mA at 9 volts in order to operate will not work from an output of 500mA. This output is only half the power requirement of the device.
Can you use a 12v 1000mA on a device that requires 600mA?
yes this will work fine
5.1v is the Voltage, You need to also look at what the Amperage rating is on the charger. 500ma, 1000ma, etc. How many Milliamps?
5.1v is the Voltage, You need to also look at what the Amperage rating is on the charger. 500ma, 1000ma, etc. How many Milliamps?
Will a 12v lithium battery rated at 1000ma run a 12v 100w light bulb?
no
What does 500mA equal to?
500mA = 500 miliamper 1000mA = 1 amp so 500mA = .5 amps
What is 1900mA in amps?
just 2 amperes because 1 A=1000mA
Can you use 750mA output charger that calls for 1000mA?
Yes - it will just take a little longer to charge the device.
