answersLogoWhite

0


Best Answer

Yes, you can. Here's why.

If a supply's output is rated at 12 volts DC (12 VDC) and 500 milliamperes (500mA), it can deliver a maximum of 500mA at the 12 volt rating. You want to use a 12VDC supply that is rated at 1A (1000mA). That means that the supply is capable of delivering up to 1A at 12VDC. Now the crux of the matter.

Your device, that's the load on the supply, needs 12VDC to operate. Your replacement supply is rated at 12VDC. No problem. Your supply delivered a max of 500mA. That does NOT mean that your load, that thing you're powering up, actually uses all 500mA. Your load knows how much current it needs to draw. Your supply has to be rated for more than that. Your supply was rated at 500mA. It worked well. The supply you wish to use will deliver a max of 1A (1000mA). It will easily supply the current your load will use. Oh, and the polarity of the new supply must be the same as that of the old one. That's pretty obvious. Always be safe and consult an electronics specialist for electrical questions. There are a number of savvy folks working at consumer electrical outlets who can get you up to speed.

User Avatar

Wiki User

6y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

15y ago

Try a local building supply store and look up the specs. of a doorbell transformer. It should be rated at 25VA minimum.

This answer is:
User Avatar

User Avatar

Wiki User

11y ago

Yes it is perfectly all right to replace a transformer with a slightly larger one provided the voltage rating of the primary and secondary are the same.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Can you replace a transformer with an input rating of 120VAC 60Hz 12W and output rating of 12vdc 500mA with one that has an input rating of 120vac 60hz 25w and an output rating of 12VDC 1A?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Engineering

Can you use a 480VAC step down transformer and apply 120VAC to the primary?

In theory, you can. If you have a power transformer rated at 480 primary side and the secondary at say 120VAC, then the ratio is 4:1. Meaning that there are four times the number of turns on the primary side as to the secondary. So, if you were to power the primary side with 120VAC as opposed to 480VAC you would expect to see a 1/4 reduction in voltage output on the secondary, or 30VAC. The current would be dependant on the cross section of the secondary conductor and core construction. As current is increased thru the load (as in resistance welding) for example, you would expect voltage to decrease or lag, a larger Industrial sized transformer is able to compensate for this lag in voltage better than a compact household power transformer.


How many 120VAC single-phase output receptacles does a 25kW Power Distribution panel have?

If you are referring to the 25KW Power Distribution Panel used by the military, NSN: 6110-01-244-3209, there are four 120VAC, 20A circuit breakers and four corresponding twist lock receptacles.


Why the transformer connected on inverter output?

A transformer is connected to the output of inverter in order to step up the AC voltage output.


What is the difference between variable transformer and ordinary transformer?

Variable transformer may also refer as auto transformer. We can vary the output voltage of the transformer. But in the ordinary transformers output voltage is already designed.


Transformer with many output terminals?

Your question is incomplete -- what about the transformer?

Related questions

What AC adapter do you need for your Trek 2200 recumbent stationary bike?

UPEXX Plug In Class 2 Transformer Model No: AM-61000 Input: 120VAC 60Hz 15W Output: 6VDC 1000mA


Can you use a 480VAC step down transformer and apply 120VAC to the primary?

In theory, you can. If you have a power transformer rated at 480 primary side and the secondary at say 120VAC, then the ratio is 4:1. Meaning that there are four times the number of turns on the primary side as to the secondary. So, if you were to power the primary side with 120VAC as opposed to 480VAC you would expect to see a 1/4 reduction in voltage output on the secondary, or 30VAC. The current would be dependant on the cross section of the secondary conductor and core construction. As current is increased thru the load (as in resistance welding) for example, you would expect voltage to decrease or lag, a larger Industrial sized transformer is able to compensate for this lag in voltage better than a compact household power transformer.


How many 120VAC single-phase output receptacles does a 25kW Power Distribution panel have?

If you are referring to the 25KW Power Distribution Panel used by the military, NSN: 6110-01-244-3209, there are four 120VAC, 20A circuit breakers and four corresponding twist lock receptacles.


Is the power supply for a Digitech whammy II 9v or 12v I need the specs for the power supply?

whammy 2 specs. ps750 class 2 transformer Ac-Ac power supply input: 120vac 60Hz 12w output 9v AC 780mA


What charger should be used for a versalite 2.0 million candle power spotlite?

SHUEN SHEN ELECTRONICAS AC ADAPTOR CLASS 2 TRANSFORMER MODEL NO. SS120-0108-1DA LISTED E219834 57WJ INPUT: 120VAC 60Hz 20W OUTPUT: 13.5VDC 0.8A MADE IN CHINA


What problems did Nikola Tesla solve when he invented the Tesla coil?

A Tesla coil is a type of resonant transformer circuit invented by Nikola Tesla around 1891. The Tesla coil is one of Nikola Tesla's most famous inventions. It is essentially a high-frequency air-core transformer. It takes the output from a 120vAC to several kilovolt transformer & driver circuit and steps it up to an extremely high voltage. He did not have any problems making his coil wich is the basis of wireless communituy today.


Where can you find Bradford Novelty company fiber optic Christmas tree power supply maxim model ma661246 input 120vac 60hz 72w output 12vac 4600ma it plugs from the tree to the wall?

I found it at http://puleo.americanweb.net/store/


What is the out put of Tesla coil in gw?

The Tesla Coil is used to produce fantastic high voltage long sparking displays. It takes the output from a 120vAC to a several kilovolt transformer and driver circuit and steps it up to an extremely high voltage. Voltages can get to be well above 1,000,000 volts and are discharged in the form of electrical arcs. Yours could be smaller depending on the size of the project.


What is the out put of tesla coil in power?

The Tesla Coil is used to produce fantastic high voltage long sparking displays. It takes the output from a 120vAC to a several kilovolt transformer and driver circuit and steps it up to an extremely high voltage. Voltages can get to be well above 1,000,000 volts and are discharged in the form of electrical arcs. Yours could be smaller depending on the size of the project.


Are halogen bulbs AC or DC?

They are 12 DC Voltage. A transformer is required to transform the main voltage (120VAC) to the low voltage (12VDC) that is required for the operation of low voltage lamps. The transformer may be wire-wound (magnetic) or electronic and both types are available with various features that dictate their application. Generally, electronic transformers have a high frequency output, are small in physical size and weight and often include features such as output voltage regulation and dimming capability.


What were Tesla coils replaced by?

The Tesla coil is one of Nikola Tesla's most famous inventions. It is essentially a high-frequency air-core transformer. It takes the output from a 120vAC to several kilovolt transformer & driver circuit and steps it up to an extremely high voltage. Voltages can get to be well above 1,000,000 volts and are discharged in the form of electrical arcs. Tesla himself got arcs up to 100,000,000 volts, but I don't think that has been duplicated by anybody else.


What inspired the Tesla coil?

The Tesla coil is one of Nikola Tesla's most famous inventions. It is essentially a high-frequency air-core transformer. It takes the output from a 120vAC to several kilovolt transformer & driver circuit and steps it up to an extremely high voltage. Voltages can get to be well above 1,000,000 volts and are discharged in the form of electrical arcs. Tesla himself got arcs up to 100,000,000 volts, but I don't think that has been duplicated by anybody else. Tesla coils are unique in the fact that they create extremely powerful electrical fields.