Probably; it is a difference of less than 4%. And since the voltage is slightly too low, you won't burn the motor - having too high a voltage is more risky.
Yes, such a minor overvoltage isn't going to worry it at all.
AnswerIn the UK, the low-voltage three-phase system operates at 415/240 V. However, to fall in line with the European Union, the nominal (i.e. 'named') voltages are now 400/230 V. No actual changes have taken place, only the nominal or named values -in other words, this has been a 'paper exercise'. So, yes, a motor having a nominal 400-V rating will operate quite safely at 415 V.
no
Current shall increase while you apply 415V for operating it and will decrease the rpm to a much low level.
It is not advisable to do so. You may burn the winding, insulation may fail.
It would not be immediately dangerous but there is a possibility of overheating with the 9% overvoltage so it isn't a good idea unless the motor is lightly loaded and watched very carefully. The safe voltage range should be marked on the motor.
The usual supply in Russia is 220 v 50 Hz which corresponds to a 3-phase supply of 381 v. You need to check your motor to see what voltage range it is designed for, but 381 v is only 4.8% low so it should be all right.
yes can run but motor only delivers 90%rated power because v/f less by 10%
no
You need a 5.5kw generator to run a 5.5kw motor.
Current shall increase while you apply 415V for operating it and will decrease the rpm to a much low level.
It is not advisable to do so. You may burn the winding, insulation may fail.
Yes, however, the RPM will increase by 20%, if the motor is connected to a shaft or driving something that can not handle the torque, then you might run to heating issues or performance issues.
The the supply stays within +/- 5% of what the motor is rated for, you can do this.
It would not be immediately dangerous but there is a possibility of overheating with the 9% overvoltage so it isn't a good idea unless the motor is lightly loaded and watched very carefully. The safe voltage range should be marked on the motor.
just connect the supply of motor to power supply..and run..then ovserve the motor sounds,temperature and vibration.
Yes, it will run drawing little more extra current in similar conditions. The motor is expected to be running in lesser rpm as well.
Yes it can run because motors have 10% voltage variation tolerance so it can operate between 380v - 440v band.
To do a motor solo run test you need to connect the motor to a power supply. Next, you observe the motor's vibration, temperature, and sounds.