No.
An amplifier designed for an 8 ohm load works best with an 8 ohm load. You can connect a 4 ohm load to it, but the current rating curve of the amplifier will not match the voltage rating curve, and will will not achieve rated power. Attempting to achieve rated power will result in damage to the amplifier.
Look at this mathematically...
If the amplifier is rated 100 watts into 8 ohms, then it can produce 28 volts doing so. It will also produce 3.5 amperes at that power. So, when we say the amplifier is rated 100 watts into 8 ohms, we mean that the amplifier is rated 28 volts or 3.5 amperes, whichever comes first.
Connect a 4 ohm load to this amplifier, and 3.5 amperes will induce 14 volts and 50 watts. You cannot get 100 watts because that would require 5 amperes and 20 volts, and the amplifier cannot produce 5 amperes.
A transducer (trans = across, duce = to lead) is a device that converts one form of energy into another. A microphone converts sound waves into electrical signals. Others would be accelerometers, loudspeakers. An oscillator on the other hand, generates a signal without there being an input signal. These are two different things.
We are sound-proofing the new recording studio.Your neighbours really need to invest in some sound-proofing.
Physical vibrations of speaker cones or metal plates by electromagnetic coils connected to the audio output AC signals from the audio amplifiers.
Vinyl windows last longer and sound better when being raised or lowered.
The digital recording gear is much cheaper and lighter than the analog gear. So everybody can feel like a real sound engineer if one has a sound card - but one can still study "Tonmeister". The sound does not depend on the difference between digal and analog. It comes from excellent playing artists in a room with good acoustics, studio microphones, and a sound engineer with sensitive ears.
By microphones, amplifiers and loudspeakers.
Because of the gravity of the earth
They sound if you have amplifier and shut if you don't
No, because the loudspeaker creates sound while the ear receives sound.
Assuming this happens in phase, the pitch of the sound will increase. If only one of the loudspeakers does this, they'll be out of phase, which will initially sound like a slow pulsed beat, but eventually will form a chord.
Because of the vibrations in the air.
Woofers or bass speakers.
Monsoon loudspeakers are available at an average cost of $99. The price will obviously depend on the size and model of the speaker. The more expensive they are, the better the 3D sound effects will be.
If you connect it over a HDMI Connection and the graphics card in question running the interface allows for sound over HDMI, then yes. If you mean "Will I get sound from my computer as I always have.. " Then yes, you will as long as your primary audio output remains selected to your normal means (analog out, SPDIF, headphones, what have you.. ) Hope this helps!
No input sound is microphone output sound is speaker
as the sound comes out of the speakers its an output
Some DVD drives offer a digital sound output which will give you better sound quality.