Want this question answered?
There is no substitute for a good quality sewing machine oil. One of the biggest causes of problems with sewing machines is that oil has been used that turns to gum or even a varnish like film with age. Sewing machine oil is a white mineral oil, meaning it is clear and has no smell. The oil has a light viscosity and will not collect on the machine's gears. It is usually marketed as machine or sewing machine oil. Cooking oil, car oil, and 3-in-one oil should not be used as substitutes.
Sewing machine lubricant (oil) is usually between $5 and $10, depending on the brand and the size. A small (under 5 oz.) bottle of sewing machine oil at your local sewing supplies store (such as JoAnn's) costs about $4.
What type of oil do I use to oil my kenmore 2142 sewing machine. I just purchased at a garage sail and it is freezing up on me. Thank you
Yes
sewing machine oil will do or 3 in 1 oil
Yes , you can but it's best to use a lubricant that is designed for that machine recommended by the manufacturer .
Singer makes their own oil for the singer machines. You can purchase it at a Wal-mart store or anywhere Singer machines are sold. I just bought some.
Your owner's manual should state what kind of lubricant to use in your machine. Typically, what is recommended is machine oil or 3-in-1 oil.
It can be used on the moving parts inside where no thread goes.
find the correct manual for your machine,get a good oil can (small with a long spout) a good grade of machine oil and follow the instructions.works for lot of machines
I do think it is the best and most commonly used.
There are a couple of ways that you can oil a paper shredder. The easiest way is to put shredder oil on a sheet of paper and run it through the shredder. Run it forward. After the paper has made it all the way through, run it backwards. This will ensure all the shredder blades get coated. I recommend oiling your shredder after every time you empty it. If you have visible access to the shredder's blades, you can squirt oil directly into the blades and run the shredder in reverse for about 15-30 seconds. Be sure to go from the far left to the far right, covering everything.