Yes, most definitely. Just use the correct filter recommended for your car.
The revtec engines are closnes of Harley Evo engines and use the same filter as the Evo's
The CARQUEST 85258 oil filter can be used with multiple vehicle engines. This filter is for use on older engines that have a carburetor instead of fuel injectors.
F250 ford
No, there is no special filter. Use the same filter you would with conventional oil.
If you mean motor oil, yes.
YES , according to the 1997 Ford Windstar owners manual and www.fordparts. com both the 3.0 liter V6 and the 3.8 liter V6 engines use the ( Motorcraft FL-400-A engine oil filter )
Need make, model, and year of engine in order to answer this question, and also if you want an OEM filter, or a specific brand of aftermarket filter. Some engines use only one oil filter, some use two or three.
You would use the same oil filter for both synthetic an d regular oil in your jeep.
A bypass oil filter has a valve in it. When the filter media plugs up, the valve open and the oil bypasses the oil filter. It prevents extreme pressure buildup in the oil filter that could blow out the media. Also, many engines use a bypass oil filtration system where only a portion of the oil goes through the filter at any time. All the oil eventually gets filtered.
Industrial oil filter for Chev and Pontiac trucks, many fork trucks, tractors, marine engines, harvesters, generators and large compressors.
The same type filter you use with conventional oil. Just make sure to use a quality filter such as Wix, Purolator, Motorcraft, AC/Delco, Bosch, Mobil !, etc. Avoid a cheap filter.
Most of the Chrysler engines from the 1980's till the late 2000's except diesel and some 4 cylinders.