The bell housing bolt pattern would be the same.
Yes.
only a Buick, olds or Pontiac engine will bolt to a Pontiac tranny as Chevy blocks have a different bolt pattern.
yes yes
Speed sensor is located on the tail of the tranny. On the side near the drive shaft. There is an electric connection that clips onto it and is held in by one 10 mm bolt.
4l60e deep or shallow pan, or 4l80e, (depending on the bolt pattern on bottom of tranny, auto zone can tell u the bolt patterns to what tranny)
Not likely. They are two different bolt patterns.
I think you will need to use the caprice tranny as the bolt holes are different on the olds tranny. Here is how it works if the motor is a Chevy you must use a tranny with the Chevy bolt patern. There is some trannys with both bolt pattern. (never seen one). If it is an olds motor you must use a BPO tranny. BPO is a Buick, Pontiac or Oldsmobile. I am sure that they do make adapter though (never seen one)
it is a manual 5 speed tranny.
It should bolt right up to your tranny.
Yes. It may be bigger but it will bolt on.
5x127
all the scouts had the same bolt patern i believe so if one would then anyone would