No, NEC section210.6(A) The voltage shall not exceed 120 volts nominal between conductors that supply luminaires(light fixture) in dwelling units. Read the code section for full details.
No, it has to be approved for the location and has to be ground fault protected.
Hook a 12 volt light to a 24 volt system and the light will burn out in seconds. You need a step-down voltage converter to do this.
Depends on the electric motor, most models use the Mabuchi 540s which is rated from 6 volt - 8.4 volt. If that's fitted you should be OK!
Yes a 220 volt light bulb will run on a 120 volt circuit but at 1/4 of the wattage that the light bulb is rated at. A 100 watt light bulb on 220 would would be equal to a 25 watt light bult on 120 volt system.
Yes, a 12 volt auto light bulb can work on 12 volt AC, but the light output might be slightly lower compared to when using DC. The bulb will still produce light, but it may flicker due to the alternating current.
Yes, for about .1 second, then it will blow the lamp. A 9v battery will however light three 3.5v lamps.
Yes, a 120 volt light can work on a 110 volt power supply without any issues. The difference of 10 volts will not significantly impact the function or performance of the light.
is the defirnce of presure above the conductor
30 inches
One can purchase a 12 volt light from a variety of stores. Some of the stores that sell 12 volt lights include Amazon, The Solar Store, eBay, and Bulbtown.
Yes it it is a 12 volt DC light bulb. It will not operate a household 120 volt light bulb.
Not necessarily. The voltage of a light does not directly determine its energy consumption. The power rating of the light (measured in watts) will determine how much electricity it consumes. A 120-volt light may consume more or less energy than a 240-volt light depending on its power rating.