Want this question answered?
Well I have the reverse, 454 manifolds on a 350, so I would think so.
the temp sensor is on the driver side of the engine block next to the exhaust manifold.
yes
yes
this is a mechanics job you have to remove inlet manifold,exhaust manifolds,and then remove heads to replace the valves
Yes it will.
I am sorry but there is no such thing as an incline pump on the 350 An in-line fuel pump is normally mounted on the passenger side front of the engine under the exhaust manifold
A 5.76 car exhaust manifold will fit a 1997 350 Vortec. Your local auto parts store or car dealership will be able to give you a detailed list of all car exhaust manifolds that will fit.
Usually on a GM 350 the sender is on the lower left side of the engine block, under the exhaust manifold.
$300-$350 depending on the shop.
With the possible exception of some very early small block heads that had offset valve cover bolts, yes, it will all fit the 283 engine.
Exhaust manifold torque is 25 lb/ft with anti-seize lube.