0
What else can I help you with?
What is the biggest engine that will fit in a 1998 mustang?
A 460 big block.
Will a c6 transmission fit in a 1985 mustang?
If the C6 is the big block version you may have to hammer the tunnel to make it fit. If it is the small block version it will fit with no modification.
How do you tell 350 big block from small block?
They dont make a 350 big block.The big block starts at 400. Wrong! 400 is still a smallblock. Big block Chevys start at 396, but does not include the 400, which the heads/crank and starter/etc. fit on the 350/305 etc.
Will a 4 speed manual transmission from a 302 bolt up to a v8 400?
If your talking about the 400(m) style motor then no it won't. The 400 has the "big block" bolt pattern, you would need a 4 sp from a big block motor to fit.
Will 350 heads fit a 400 block?
350 heads will bolt to the 400 block. They will need to be drilled for the "steam ports" in the 400 block.
Can a small block Chevy fit in a 91 mustang?
Yes.
What small block Chevy heads can you use on a305 4bbl Chevy motor?
305 heads of course, 350 heads will fit for sure and possibly 400. obviously no big block heads will fit. a 305 with 400 heads gets you a little over 352. 350 with 400 heads is a 383. add and divide
Will a transmission from a 400 small block fit a 350 small block?
Yes.
Will a c6 fit a 360 ford engine?
Depends on the C6. The 360 is from the FE/FT big block ford family. If the C6 came from behind a 331-428 big block, it will fit the 360. The exception being the 335 series big block trannies (351 C or M, 400) or the 385 series big block trannies (429, 460). The 335 and 385 series big blocks shared a bell housing (with some rare exceptions in the 335 family which had a small block bell housing) which was rifferent from the FE/FT.
Will a 84 mustang 302 fit an 88 mustang gt and what will you have to changewill the intake work its carb now?
the 84 302 'can' fit into the 88gt, but the width of the small block will be a bit to big to fit in the 88. you'l need to plasma cut 'or any way of cutting' oway at least 3 inches off the lower firewalls on the pasenger side area.
Will a 302 long block fit in a 92 mustang?
Pretty much anything with fit in the Fox body so I would say yes.
Will a 1995 Lincoln Continental 4.6 liter fit in a 1997 mustang gt?
The Block is the same...be prepared to change EVERYTHING on the motor to get it to fit.
