Might last a little less, but being 2mm thicker may provide better contact, and since it is a bit smaller, if the battery socket is just a slide in clamp, yes you can interchanged them. Not so from a 2430 to a 2032, that one is a no no.
Cr2025
Yes
No, they are not the same size. CR2032 is 20mm in diameter while CR1632 is 16mm in diameter.
I used A Duracell DL2032 to replace a Maxwell CR2032. It seems to work just fine. It is used for my on board computer on my bike.
No, the CR 2450 is thicker
CR always mean lithium 3 volt. First two numbers are diameter in mm, second pair of numbers is thickness in mm. Thus CR1032 is 10 mm diameter x 3.2 mm thick and CANNOT replace the 2 times larger CR2032. There is NO CR1032 in production, CR1025 is closest replacement and can be used with aluminum foil as a tight shim. Thank you Bill from batterybob.com
Yes you can, as long as there is wiggle room inside the device. The CR2032 is slightly thicker. However, mixing batteries is dangerous, so be careful using the device until you know how it will react to the alternative power.
No. You would only have half the voltage required as they are the same voltage.
cr2032 same as lr44?
The CR2032 is twice as thick as the CR2016 and has a larger ah capacity. If the extra thickness is not a problem, the CR2032 will be a good replacement for the CR2016. Some mounting methods are thickness specific and others are not! Other than this there is no replacement for this battery.
A CR2032 battery is a 3 volt lithium button cell battery. For more important information about a CR2032 button cell battery, check out the website, Duracell.
Nope. I am no battery expert, but I have, in my hot little hand, one CR2025 and one CR2032. The two have the same diameter and both are 3 volts, but the CR2032 has a considerable amount of extra depth. My camera remote requires a CR2025. I have some extra CR2032's laying around for a scale, so I thought I would give it a shot. The CR2032 does not fit.