0
no
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How do you set your ps3 from hdmi2 to a VCR?
The setting on the TV set for your PS3 is controlled by what input it is plugged into on the back of your TV. You can not change it to VCR on some sets without also switching back to the A/V cable and losing the high resolution. I don't know of any TVs that have an HDMI plug for a VCR.
You just bought a good used TV and VCR and you just want to use the TV to play video tapes - can you do this?
yes just attach the vcr to the tv, set vcr on channel 3 or 4 and tv on same or vidio setting and have at it
Can you use TV vcr without a TV signal?
Yes.
Can you connect a VCR to a television set using a biaxial cable?
yes
With a new hi-def TV set, what kind of VCR should I be looking for?
If you can still find a VCR they will all have the same picture.
Can you record a cable program on your VCR if your cable is run to the TV without a cable box?
Yes, you can as long as you have the coax cable connected to the VCR first and then to your TV. Some TVs have RCA A/V outputs also and you can connect a VCR to them. Even better is to use the RCA A/V connections from the cable box to VCR, VCR to TV.
Do I need a VCR stand for my VCR to work properly?
A VCR stand is not necessary to make a VCR working properly as it is only a piece of furniture used to hold the VCR. A VCR will work as long as it is plugged into the wall and hooked up to a TV.
What was the VCR used for?
Recording shows off the TV onto VHS tapes. Or playing shows from VHS tapes on your TV. A VCR was used for playing tapes similar to a casset player but the VCR play video and audio.
How do you hook up VCR to TV without video audio inputs?
Coaxial
How do you hook up a surveillance camera to a VCR so that it can record while monitoring?
your camera should have some kind of output...just plug it into the VCR, get the vcr onto the right input to see the camera, set the VCR to SLP with a tape with a good amount of time you can record and set the vcr to automatically rewind when it reaches the end while recording. put one of the vcrs outputs to a tv and make sure the vcr is getting the input from the camera right. from there set the vcr on record. all done!
What percentage of US television owners also own a VCR?
94.5% of television owners WITHOUT TiVo/DVR have VCR. That number drops to 60% of television owners with TiVo/DVR (but the percentage of people who use VCR when they have digital recording is much lower).
How do you hook up a VCR and DVD recorder to a satellite receiver and TV?
Go out from the dish set-top box and into the vcr and then out from vcr into the tv. Most receivers have outputs that are RCA (Yellow/Red/White). On the back of your VCR, you should have inputs for RCA. Also have inputs on the back of the Television. There are two ways to go if it is a non-HD receiver: Coaxial and RCA ---- Take the cable output from the back of the receiver (it says "out to tv") and connect that to the input on the VCR. Then take another cable and attach it to the output on the VCR and connect that to the TV's input. This requires you to set the TV to either channel 3 or 4 depending on the setup on the VCR. ---- Take the RCA (Yellow/Red/White) from the receiver to the VCR inputs and plug them in. Hookup the VCR to the TV using the Coax or using the RCA output on the VCR. Note: this will require you to set the VCR to the TV/VCR setting in order to view the Video/Audio output. This would require either changing the channel (Coax output) or changing the TV's video input.
