This could be a trick question. If it is a gas dryer yes. Hot and neutral without a ground. 110 volts to the dryer motor and controls. Heat coming from gas.
If it is an electric dryer no. The heater element requires 240 volts. You could get this from black and red. 2 wires the controls require 110 requiring black and neutral.
The dryer wouldn't heat ( the electric heating element.) with only 110 volts.
In any case no dryer should operate with only 2 wires. It is the third wire or 4th wire that may save you life. That is the equipment ground conductor, that provides a safe path for electricity to return to ground in case of an malfunction.
Save the planet, put out a laundry line, and hang your cloths to dry.
Change either the plug or the cord. The fourth prong is another ground. It would be easier to change the cord.
I would not recommend trying to use an extension cord for a dryer. the better option is to either buy a longer cord that is properly sized to deal with the extra distance or have an electrician come out and either move the outlet or custom make you a longer cord for your dryer.
It may be a 220 Dryer, and you will need a new outlet installed. There should be no extra wires when connecting the Power cord to the plug
Dryer plug three to fourOpen up the electrical access panel on the back of the dryer. You will see a terminal block with three wires going into it from the plug cord assembly. A red and black and white are now connected to the terminal strip. Look at the position and colours of the existing 3 prong cord and how it is connected. Make a diagram. Coloured wires on the outside terminals white in the center. From the center wire terminal you will see a jumper strap that goes to the frame of the dryer. When installing the four prong plug this jumper is removed completely. The kit should have with it a grounding lug that connects to where the removed grounding strip attached to the frame of the dryer. This is the attachment point for the fourth green ground wire from the new dryer cord assembly.
You have to go buy a new four prong chord, unscrew the base of the old chord, and switch them out.
A qualified electrician should make the change to a dryer connection. The best way to cheaply make the change is to change the power cord on the dryer to the three hole standard.
Change either the plug or the cord. The fourth prong is another ground. It would be easier to change the cord.
At any DYI store.
How do the wires connect on a 3 prong electrical cord on the lde8414ace maytag dryer
I would not recommend trying to use an extension cord for a dryer. the better option is to either buy a longer cord that is properly sized to deal with the extra distance or have an electrician come out and either move the outlet or custom make you a longer cord for your dryer.
It may be a 220 Dryer, and you will need a new outlet installed. There should be no extra wires when connecting the Power cord to the plug
Under the new electrical code rules three prong dryer cord receptacles and therefore cords are not allowed to be installed. As you are finding out, stores are not carrying them in stock any more. You should consider an upgrade for safety sakes, to a four prong plug cord and change the wall receptacle to a four prong receptacle. There are instructions on how to do this your self on Answers.
Dryer plug three to fourOpen up the electrical access panel on the back of the dryer. You will see a terminal block with three wires going into it from the plug cord assembly. A red and black and white are now connected to the terminal strip. Look at the position and colours of the existing 3 prong cord and how it is connected. Make a diagram. Coloured wires on the outside terminals white in the center. From the center wire terminal you will see a jumper strap that goes to the frame of the dryer. When installing the four prong plug this jumper is removed completely. The kit should have with it a grounding lug that connects to where the removed grounding strip attached to the frame of the dryer. This is the attachment point for the fourth green ground wire from the new dryer cord assembly.
You have to go buy a new four prong chord, unscrew the base of the old chord, and switch them out.
As far as I know, you can't. It would be safer to have a new outlet installed closer to the dryer.
Green is ground and white is neutral.
All three prong dryer cords should fit all three prong outlets. Dryer and stove plugs are different but as long as someone didn't use one in place of a dryer cord, there isn't a problem.