Yes, you can have current leakage with any device. Check the device with an ohm-meter with the POWER turned off. Unplug the device and check between the hot leads and the ground wire. It should be infinite readings. Check also from hot leads to device chassis or metal case.
Yes, there is no reason why this can not be done. In fact a benefit of this is that every receptacle downstream from this new receptacle will also be protected by the GFCI receptacle.
Not if the GFCI breaker is supplying the circuit you are wanting to put the GFCI receptacle into.
How far do u put a GFCI receptacle from water
A down stream receptacle that is connected to the upstream GFCI will be protected. If the downstream receptacle senses a fault the upstream GFCI will trip.
The term GFCI stands for Ground Fault Circuit Interrupter.
If it's a GFCI receptacle and the button is not resetting then change the GFCI outlet.
The last answer is incorrect. Some GFCI's are designed to light up when working, some are designed to light up when tripped, some are designed to have different color lights depending on normal or tripped conditions. The only way to tell if the receptacle has power is to TEST it. If the GFCI is supposed to be tripped and power is still available, it is either not operating properly or it is not wired properly. If in doubt, have an electrician inspect it for proper operation. Incorrect answer: >>Provided that the GFCI is wired correctly, the indicator light indicates that the receptacles have power. If the light is off there is a ground fault. In other words, the light should always be on.
Yes, there is no reason why this can not be done. In fact a benefit of this is that every receptacle downstream from this new receptacle will also be protected by the GFCI receptacle.
Most probably the receptacles downstream from the GFCI would not be protected by the GFCI receptacle.
Not if the GFCI breaker is supplying the circuit you are wanting to put the GFCI receptacle into.
The pilot light in a GFCI is an indication that the receptacle is hot, maybe they should add a red pilot light to indicate that no power is coming out of the outlet and green when power is available.
8 ozs. and will vary by mfr. for an in-wall receptacle.
Yes.
How far do u put a GFCI receptacle from water
A down stream receptacle that is connected to the upstream GFCI will be protected. If the downstream receptacle senses a fault the upstream GFCI will trip.
press the reset
The term GFCI stands for Ground Fault Circuit Interrupter.