You can take your diamond to a certified diamond cutter to get an estimate of how this might be done.
Be aware, however, that geometrically, you may not have enough original material to be cut into three stones, given that some percentage of the original stone will be lost in cutting. The remaining three stones could be too small to accomplish your goal, especially if you want the three stones to be more or less equal.
It depends on what the band of the ring is made out of and the diamonds quality. It can be taken to a jeweler to find out a estimated value.
You could make a very small window -- about 15.3mm in a pear shape from a 16 carat pear diamond that you can buy today at Blue Nile -- US$624,000. You may be able to purchase a larger diamond to make a larger window, from an auction. The cost will be in the millions of US Dollars.
Take your diamond to a certified gemologist to determine the cause of the line. It is not a normal occurrence in a diamond: the line may be man-made. Your stone may be 'capped' with a diamond above the girdle and may be another stone below the girdle, or two stones glued together. This is highly unusual, but is possible. The line may also be a jeweler's mark, made with ink.
18 carat is better than 14 carat. 24 carat is pure gold. 18 out of 24 is 75% gold the rest is made up of silver.
made of
There is no one average cost for a three carat diamond ring. Rather, the cost will depend on many factors. These include but are not limited to the cut, clarity, color and overall quality of the stone, the material used to fabricate the setting and whether the ring features a three carat solitaire stone or a three carat total weight piece made up of many smaller stones. So a three carat total weight ring made up of many small, lower quality stones in a mass produced ten karat gold would be worth possibly $1000 or even less depending on the actual stone quality, while a flawless or nearly flawless three carat solitaire in an expensive cut and mounted in platinum could easily be priced at $20,000 and up.
About 10 carat rough yellow diamond was produced by diamond manufacturer in Russia, St-Petersburg
Raw diamond stones are cut according to an individual plan made for that particular stone, which maximizes its natural clarity and carat weight. (About 60% of the raw stone is lost in cutting into a fine shape.) Diamonds are cut with diamond-tipped tools, lasers and polished using wheels coated in diamond dust.
A karat signifies how pure gold is and the higher the more gold there is. Pure gold, which is 100%, is too soft to use so it often has other metals mixed in to make more durable. A carat is actually a standard unit of measure that defines the weight of a diamond. One carat is equivalent to 200 milligrams. Carat sizes are also expressed as “points”, with a one carat diamond equaling 100 points, a one-half carat diamond being 50 points, a three-quarter carat diamond being 75 points, and so on.
In a word, yes. However, a certified gemologist will value a man-made diamond lower than a natural diamond with the same attributes, being cut, colour, carat weight and clarity.
Cubic Zircons are often meant to mimic diamonds. Since CZs have a more dense specific gravity than diamond -- Wikipedia indicates at least 1.6 times that of diamond. This means that carat weight would be less for the CZ to equal the carat weight of a diamond, both being equal in size. Using the number 15 indicates that you're looking for a large stone. In this case, you may want to go by measurement and not by carat weight. For example, a 15 carat, round diamond measures about 16.3mm across the diameter of the girdle. Presenting the data in reverse, a 15 carat CZ will weigh 1.6 times more than a 15 carat diamond: so the equivalent size diamond in weight will be less than 15 carats. Determining the carat weight of a CZ which is 16.3mm across at the girdle can be made by a jeweler who can weigh the CZ stone and give you its equivalent carat weight.
Any diamond -- man made or mined -- is valued according to its cut, clarity, colour and carat weight. A man-made stone will cost significantly less than a mined diamond when both are similarly described.
A diamond ring is composed of a diamond or multiple diamonds, and a metal band.
Changing a Ring Into Something Elsea three stone pendant would be nice PENDANT SETTING EXAMPLEAbsolutely, a pendant is beautiful, I have an image of a pendant which we made using three smaller stones than yours and it looks stunning. We have had great responses to this setting.
Diamonesk diamonds are not real diamonds. They are stones that are made to look like real diamonds. They are a brand of diamond ring.
The largest diamond in the world was over 3,000 carats. The diamond was made into 105 smaller ones.
No they are not. Chocolate, in this case, refers to the color of the diamond, not what it is made from. The stones are gorgeous to look at, but the more color a diamond has, the more expensive it becomes.