Yes they can.
The same that is used above ground. Sweat fitting coupler. I would not use copper underground in an area that has winter.
Jic is a 37° Flared Fitting sae is a 45° Flared Fitting
A street fitting is a fitting that is designed to attach to another fitting, It can also be one that is design to connect two or more fittings together. It can be destinguished by its male end or ends that will fitt snuggly into the female end of another fitting of the same diameter. They or sometimes used to simplify a connection, to make a connection in a tight or unusual spot, and to change direction. A street fitting can be an ell (elbow), a tee, an adapter, etc.
In underground areas. In underground areas.
A tube connector is the standard fitting that goes on a tube or hose. A tube adapter fits to a tube or hose and enables it to connect to a fitting of a different size to its standard.
Victaulic makes a dielectric fitting that could solve your issue.
A Victaulic fitting is really a grooved end fitting that is used with grooved end pipe, joined with a coupling. These are found on a variety of commercial and industrial piping systems. Victaulic is the company that originated the grooved piping method so the name "Victaulic" is their registered trade name. The correct generic terminology for these fittings is simply grooved end fittings.
Victaulic products have a long history of being used on underground piping systems.
Victaulic was created in 1925.
Yes , it is required, any water base lubricant on the gasket inside the fitting is required before final connection.
1-13/16"= The tangent of half the degree X the radius of the elbow.
no
No. Victaulic fittings are rated for a wide range of liquids, but the only gas they're rated for is air.
250
Replacing the heater hose bypass fitting will depend on how the fitting was installed. It could be screwed or bolted in. Try searching for your specific vehicle for a detailed description of the install.
· Gruvlok Coupling
The owners prefer to stay out of the spotlight.