answersLogoWhite

0

no because then it will float.

Correct Answer

I have over 30 years experience in the pool industry. I have no idea what the previous answer is trying to say. The fact is, the liner is the same material but they are made to fit a specific size and type of pool. Above ground pools use liners that either lock into a bead around the pool or they overlap the wall. Inground pools only use liners that lock into a bead. Regardless, if the liner is not made to fit the pool you want to use it in, it can not be made to fit. So, the short answer is...no.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

What type of underlayment should be used for an above ground pool?

For an above ground pool, it is recommended to use a foam or felt underlayment to provide a cushioning layer between the pool liner and the ground. This helps to protect the liner from damage and provides a smoother surface for the pool.


Can i get a used pool?

Yes as long as the above ground pool walls aren't rusted and all the parts are there its easily removed and relocated. You will need a new liner.


What is a vinyl pool liner lock?

A vinyl pool liner lock is a device used to secure and hold in place the vinyl liner of an above-ground swimming pool. It typically consists of a track or groove that the liner is fitted into, preventing it from shifting or coming loose. This helps maintain the liner's position, ensuring a snug fit and minimizing the risk of leaks or damage. Properly installed, a liner lock enhances the longevity and appearance of the pool.


What do you need to do to prevent damage to pool walls and liner as my above ground pool cover has collapsed into pool from weight of snow and ice?

If you can get to it, remove the wire used to hold the cover on. Remove as much snow as you can, try to minimize the weight on your pool.


How do you repair a slash in a quick set above ground vinyl pool?

You can purchase a patch kit at any swimming pool retailer and use the same type of patch that is used for an above ground swimming pool liner - the kit is relatively inexpensive but it takes a while to seal but around the slash it should be clean as possible and the drier the better


Can you install an above ground vinyl pool inground?

Apparently you can I spoke to some one who did this as he was not interested in the hassle of having to remove an in ground pool later on when he got sick of it. The method he used was quite simple. He used a 5' deep above ground pool with powder coat zincalume surround. I forgot the dimensions of the pool but it was pretty big one. # Dig a hole to the depth required he had a fall in the land so he left the top rail of the pool about 4" / 100mm above the ground on the up hill side and ended up about a 1' / 300mm above the ground on the down hill side # make sure the hole floor is level and then cover it in about 4" / 100mm of washed river sand. # Build the pool inside the hole. # install necessary plumbing. # Fill the pool. # After the pool is full of water back fill the gap between the pool and the ground with a 10 to 1 mix of sand cement. He told that this lasted him 20 years at which time the liner needed replacing when he took the old liner out he found that the rest of the pool was still in top condition.


Can you install an inground pool above ground?

Apparently you can I spoke to some one who did this as he was not interested in the hassle of having to remove an in ground pool later on when he got sick of it. The method he used was quite simple. He used a 5' deep above ground pool with powder coat zincalume surround. I forgot the dimensions of the pool but it was pretty big one. # Dig a hole to the depth required he had a fall in the land so he left the top rail of the pool about 4" / 100mm above the ground on the up hill side and ended up about a 1' / 300mm above the ground on the down hill side # make sure the hole floor is level and then cover it in about 4" / 100mm of washed river sand. # Build the pool inside the hole. # install necessary Plumbing. # Fill the pool. # After the pool is full of water back fill the gap between the pool and the ground with a 10 to 1 mix of sand cement. He told that this lasted him 20 years at which time the liner needed replacing when he took the old liner out he found that the rest of the pool was still in top condition.


Where can one purchase an above ground pool online?

Above-ground pools can be bought at several online retailers. Examples of these retailers include Leslie's and Walmart. A used above-ground pool can also be found at eBay.


Can a rip approximately 6 inches from the bottom of sidewall of an above-ground pool be fixed without draining the pool?

Yes, pool companies sell "Under Water Cement" and patch kits. If you hole is bigger than the usual patch, ask the pool company to sell you a piece of used liner.


What size to build cement floor for 14' round pool above the ground?

I used a sand base for our 20' round above ground pool. It's much easier to deal with after the pool is gone. Greener too.


Hayward Pool Products?

form_title= Hayward Pool Products form_header= Take a dip in your pool with a Hayward pool products. Is your pool in ground or above ground?*= () In Ground () Above Ground What products do you need?*= _ [50] Do you have any coupons for your products?*= () Yes () No


What do you put under a small above ground pool to level it?

I just put up an above ground pool and we used sand to level the ground. To level the sand, we used one of those string levelers and tied it to stakes on each side of the pool area to make sure it was all level.