Apparently you can I spoke to some one who did this as he was not interested in the hassle of having to remove an in ground pool later on when he got sick of it. The method he used was quite simple. He used a 5' deep above ground pool with powder coat zincalume surround. I forgot the dimensions of the pool but it was pretty big one.
# Dig a hole to the depth required he had a fall in the land so he left the top rail of the pool about 4" / 100mm above the ground on the up hill side and ended up about a 1' / 300mm above the ground on the down hill side # make sure the hole floor is level and then cover it in about 4" / 100mm of washed river sand. # Build the pool inside the hole. # install necessary Plumbing. # Fill the pool. # After the pool is full of water back fill the gap between the pool and the ground with a 10 to 1 mix of sand cement.
He told that this lasted him 20 years at which time the liner needed replacing when he took the old liner out he found that the rest of the pool was still in top condition.
Justin Bieber has a inground pool
form_title=Hire a Swimming Pool Contractor form_header=Install a swimming pool in your back yard for hours of fun and enjoyment. What size of pool are you looking to get?=_ Will this be an inground or above ground pool?= () Inground () Above
They will most likely work, they just have to have the same specifications.
It depends on what type of pool kit you are referring to. If you are looking for inground pools, no. If you are looking for above ground pools, yes. They have an above ground pool for $349.
To install the water return fitting above the ground pool, you have to switch off the source. After this you can then install the water.
In simplest terms, an above ground pool pump is a flooded suction pump, which means the water level must be higher than the pump for it to operate, and an inground pump has the ability to draw water up from a level lower than the pump. The engineering and structure of these two different types of pumps is what makes them work the way they do. This means that, in a typical installation, you could use an inground-specific pump on an above ground pool, but not an above ground pump on an inground pool with the water level below the pump.
An in ground pool and an above ground pool have difference maintenance requirements. You should start by researching the time and effort it would take to maintain them. Then make your decision based on your research.
Inground wedding cake steps are specifically designed for use with inground pools and may not be suitable for above ground pools due to structural differences. Above ground pools typically require steps that are designed to support the weight and provide stability on their unique structure. Using inground steps on an above ground pool could pose safety risks and stability issues. It's best to use steps specifically designed for above ground pools to ensure safety and proper fit.
In simplest terms, an above ground pool pump is a flooded suction pump, which means the water level must be higher than the pump for it to operate, and an inground pump has the ability to draw water up from a level lower than the pump. The engineering and structure of these two different types of pumps is what makes them work the way they do. This means that, in a typical installation, you could use an inground-specific pump on an above ground pool, but not an above ground pump on an inground pool with the water level below the pump.
Generally...no. In simplest terms, an above ground pool pump is a flooded suction pump, which means the water level must be higher than the pump for it to operate, and an inground pump has the ability to draw water up from a level lower than the pump. The engineering and structure of these two different types of pumps is what makes them work the way they do. This means that, in a typical installation, you could use an inground-specific pump on an above ground pool, but not an above ground pump on an inground pool with the water level below the pump.
Probably not going to be adequate.
mainly because they are rated on BTU size...