0
Can an insurance adjuster remove contractor's name from check on a roofing insurance job?
Wiki User
∙ 11y ago
Possibly. When a check is cut by an insurer, typically the mortgage company and the insured are on the check but not necessarily the contractor. If all three are already on it is likely very hard to have the insurer re-issue the check to take the contractors name off.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
If I remove ten squares of roofing how many cubic yards of roofing waste?
3-4
How replace a slack adjuster on ken worth t660?
Remove the cotter pin and pin connecting the slack adjuster to the brake chamber, remove the locking ring on the inside which presses the slack adjuster to the s-cam, slide (or hammer) it out. Installation is opposite of reverse.
Were is the handbrake adjuster on Kia caren?
adjuster is located on handbrake remove centre consul adjuster on right hand side of handbrake lever carens mk 11 2002-2006
How do you remove roofing tar from clothing?
Hammer & Chisel always worked for me.
How do you adjust handbrake on Mitsubishi lancer 2006?
There is an adjuster at the handbrake lever you have to remove the plastic surround to access this adjuster. However there is an aduster on each rear wheel as well. If you remove the wheel you will see a small round rubber plug you will need to remove this plug and rotate the disk whilst looking into the hole and near the bottom of the rotation you should be able to see an adjuster mounted between the brake shoes. You should be able to turn the adjuster with a flat screwdriver.
How do you remove auto adjusterpulley for serpentinebelt?
need to know how to remove a bolt from a serpetine auto adjuster pulley so I can replace it
How do you remove the alternator from a 1995 mercury villager?
Remove the right wheel, then get down underneath it, remove the splash shield, back off the adjuster, remove the belt, and unbolt it.
Can you put new corregated roofing over asbestos corregated?
You can but it is not recommended. The old roofing sheets will promote corrosion under the new sheets. Far better to remove the old corrugated roofing first.
Metal Roofing Colors?
PVC roofing is considered the best flat roof material on the market for many applications. PVC roofing is more expensive than other single-ply commercial roofing materials, but it comes with a long list of advantages. For starters, the reinforced membrane protects PVC roofs against impact damage and cracking, which can reduce the lifespan of single-ply roofs. Because it is minimal maintenance and has a long lifespan, PVC roofing is one of the best flat roof materials. On newly installed PVC roofing, some contractors provide a 20-year warranty. Furthermore, PVC roofing, like TPO roofing, has a reflecting white tint, which is beneficial since it reduces energy expenses significantly. A preventive roof maintenance inspection is important for flat roofing or any other types of roofing material to prevent bigger and more costly damages and prevent the roof from replacement by repairing the problems earlier.
What to do when your roof leaks?
9 Things To Do When Your Roof Leaks First, control the interior damage as quickly as possible. Remove the water. Call your insurance agent. Inspect the roof, inside and out. Clear the gutters and downspouts. Inspect the flashing. Look for hidden damage. Check for pests. Call a licensed roofing contractor. Re-roofing can be expensive, so be sure to get several estimates from different contractors before selecting someone to do the work. Verify that the contractor you choose is licensed, has insurance and will apply for the proper municipal permits to do the work. Do not allow the contractor to begin work on the house if permits have not been issued and make sure the contractor replaces all of the damaged wood prior to re-roofing the house. After the roof work is complete, ask the contractor to go over proper roof maintenance with you, and be sure to get a final inspection from your municipal housing authority.
How do you change park brake on 1 ton pickup?
Find the cable, leading from under driver foot area to rear wheels, usually in two parts, front to adjuster and adjuster to rear coupler. Remove these by undoing the adjuster, then either lube all cable or fit new ones
How do you replace the driver's side seat motor in a 2000 Ford Expedition?
REMOVAL & INSTALLATION 1. Remove the seat from the vehicle. 2. Tag and disconnect all necessary motor electrical connections and motor-to adjuster cables. 3. On newer model vehicles, unfasten the adjuster assembly retainers and remove the adjuster assembly. 4. Unfasten the motor assembly retainers and remove the motor assembly. Installation is the reverse of removal. ------------------------------------------------ http://autorepair.about.com/library/faqs/bl742g.htm
