0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Why your car shakes at high speed?
Tire is not properly balanced, Tire is defective and/or out of round, Tire has a broken internal belt, a bent wheel, If the vibration is extremely fast and produces a droning noise, a defective universal joint or defective drive shaft is the likely cause..
What do a scale a tire and a checkbook have in common?
They are balanced
What do a checkbook tire and a scale have in common?
They are balanced
What causes wheel tramp?
Static imbalance or an out-of-round tire or wheel. Can also be caused by serverly worn shocks/struts. Have the tires balanced and the wheels checked. Inspect the shocks/struts.
Why tire is round?
If a tire were square, than it would be a dick.
Why does your right front tire wobble from 45-60 mph?
The tire needs to be balanced or the shock is dead.
What is a balanced tire?
One that has been put on a machine and weights added to compensate for any imbalance/imperfection caused either by wear or by the mfg. process (on new tire)
What if your 1997 Dodge caravan has a vibration in the left front tire at speeds between 30-45mph?
vibration in a tire at certain speeds usually means that wheel needs balancing.while wheel is off car being balanced have it checked for out of round or any bulges in side walls
Why would your wheel shake in a 2003 KIA Spectra?
most likely its a dynamic balance, basically you need to get your wheels balanced, but wheel bearings could cause it (least likely) an out of round tire may cause it (most cause is static balance) bottom line get your wheels balanced
How do you know a tire rim is bad?
Unless you see any cracks etc in the rim itself Take it to a tire shop or garage and have it spin balanced...May just need to be balanced, Chuck
You have a 94 Honda Accord and the floor and seat of the driver's side vibrates at hgwy speeds you just replaced axel ball joints CV boot tires balanced and aligned Any ideas why?
I would look for a tire that is out of round or a bent wheel. I would place each one on a balancer and watch the horizon of the tire for a out of round condition. Do the same for a possible bent rim. You see, you can balance a bent rim and a out of round tire...This should have been caught at that time. If your shop seems unresponsive to this, go to a different shop.
What shape is a tire?
Round Shape of course :)
