answersLogoWhite

0

Round Shape of course :)

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

What 3D shape is a tire?

what 3d shape is a tyre


Why flat tire when pressure goes down?

Air pressure holds the tire in a round shape, as pressure lowers nothing is holding the tire up.


Why is it that The lower the tire pressure the greater the contact area between the tire and the pavement?

the lower pressure fails to keep the tire's shape so the rubber of the wheel is pulled downward by gravity.


Can an out of round tire be balanced?

An out-of-round tire can be balanced, but it may not resolve all vibration issues since balancing primarily addresses weight distribution rather than the tire's shape. If a tire is significantly out of round, it might be necessary to replace it, as balancing may not eliminate the problems caused by the irregular shape. Additionally, a tire that is out of round can lead to uneven wear and handling issues, making it unsafe for use.


How rubber used in the tire?

It is used to make a moulded shape around a fabric and steel wire 'skeleton' to end up as a flexible tire.


What is the shape and amount of tread on a tire?

square and about 1/4 inch wide


What is a bag-o-matic tire curing press?

Is a Curing Press where the Green Tire is cured, with steam heat , some use a combination of steam and nitrogen. is where the green tire becomes a Tire, and it takes the final shape with all the mandatory information the tire has on the sides.


What is the difference between front and rear motorcycle tires?

There are two main differences between a front and rear motorcycle tire. The rear tire is flatter while the front tire is more triangular in shape. The triangle shape of the front tire helps the bike enter and exit turns while the flatter shape of the rear tire gives the bike more stability. The second difference is that the forces generated on the rear vs. the front tire are reversed. The rear tire is subjected to acceleration forces while the front tire is subjected to the majority of the braking forces therefore the inner lacing of the tires are set up reversed. That said, you can run a rear tire on the front if you reverse it so the rotational arrow is backwards. Do not attempt to run a front tire on the rear. You will lose the stabilizing effects of the rear tire and the tire will also wear out much faster since it doesn't have as much tread to start with.


What causes out of round tire?

Could have hit a serious pot hole and damaged the tire.


What are the differences between a bike tube and a tire?

A bike tube is an inflatable inner tube that holds air, while a tire is the outer rubber covering that provides traction and protection. The tube is placed inside the tire and inflated to give the tire its shape and support.


What makes a vehicle tire bulge or lose shape?

You probably have a broken steel/fiber ply belt in the sidewall. usually this is caused by two things, a manufacturing defect or an impact to the side wall (like hitting a pot hole). You should get the tire replaced quickly since it is a safety hazard and the integrity of the tire is compromised (thats why you get a bulge as it starts to lose shape). This might cause the tire to blow out.


What is the warning light that looks like an exclamation point in a you shape?

means tire pressure is low.