answersLogoWhite

0


Best Answer

Yes

User Avatar

Wiki User

10y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Can cars be driven on 45 deg days?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is 25 to 45 degrees celsius in Fahrenheit?

25 deg C = 77 deg F 45 deg C = 113 deg F


What is the climate like in Senegal?

where winters are mild (7 deg C/45 deg F in January), summers are cool (16 deg C/61 deg F in July), and rainfall is frequent (800 mm/32 in) during 180 days of the year.


What is cotangent of 45 degrees?

cot(45 deg) = 1.


What is 45 degrees Celsius in F?

The correct spelling is Celsius. 45ºF = 7.222ºC


How cold should the air be for a cars ac?

I have a 01 Buick and the ac temp that comes out of the vents is around 50 deg - at idle and around 45 deg at highway speed - Is this normal a normal temp? or should the ac temps be colder?


What is the cot of a 45 degree angle?

1 cot(theta)=cos(theta)/sin(theta) cos(45 degrees)=sqrt(2)/2 AND sin(45 degrees)=sqrt(2)/2 cot(45 deg)=cos(45 deg)/sin(deg)=(sqrt(2)/2)/(sqrt(2)/2)=1


What is the Dfference between 5d 45 DEG elbow and 10d 45DEG elbow?

What is the Dfference between 5d 45 DEG elbow and 10d 45DEG elbow?


How many equal angles are there in a right angle triangle?

At most two: 45 degrees(deg) and 45 deg. Of course, there may be no equal angles, e.g. 30, 60 and 90 deg. As long as the angles add up to 180 deg and one is one right angle (90 deg) while the other two add up to 90 deg, the triangle is a right triangle.


What is 113 Fahrenheit equal to Celsius?

It is 45 deg C.


-45 Celsius colder than -45 Fahrenheit?

0


What does CO2 gas in 40 degrees Celsius?

CO2 gas does not in 40 degrees Celsius. Not anything different from 35 deg or 45 deg.


What is the degree of the cut for installing crown molding on a cabinet. but 45 is not the answer?

Half the angle it is to be mounted to. Example- A 90 deg cabinet corner would require that each piece of molding is cut at 45 in order to butt up flush to each other. If a corner cap is used that cover 45 deg of the 90 deg corner, then each piece of molding would be cut to 22.5 deg in order to butt up flush to the cap.