Electrical installations must only be worked on by competent persons. Your question demonstrates that you are not! Call an electrician!
first of all plug in usb to parallel printer cable into the computer windows automatically installed found new hardware after that connect the cable into your printer
This is a 25 pin cable, usually used to connect a printer to your computer (parallel port). Most printers connect using the USB cable anymore, as other external devices.
cross sectional area of cable * voltage drop
A cable or wifi. If a cable is used, it may be classed as a serial, parallel, or USB connecting cable - depending on the type of printer.
we use straight cable to connect between the router and switch as router and switch are different devices.
Usually, nowadays, by using an USB cable or by wifi (wireless). A serial or parallel cable connection is less used except on much older printers.
You can measure its diameter with a micrometer. For this the cable does not have to be vertical.
Simply work out the area of a section of cable.........
Conversion of cable diameter to circle cross-sectional area and vice versa. Scroll down to related links and look at "Conversion of cable diameter to circle cross-sectional area".
You can connect two or more computers using the following cables: Network cable USB cable Serial (used in old computers) Parallel (used in old computers)
Parallel cables are typically used to connect a printer to a computer. It is a long cord with a broad, flat plug on either end. The recommended maximum length of a parallel cord is 6 feet.
This will require a modification to your units to allow them to be "hooked" together. You will have to add another connection to your generator that connects to your generator output, one cable for each fase. Connect a slave cable from one unit to the other, and connect the communication cable so they can share the load. The generator will do the rest.