Yes. The sensor or the wiring and connections could be faulty.
the crank sensor is somtimes located on the top of the oil pan. i know it is atlest on the 91. side of the block just below the exhaust manifold it takes a 10 mm socket
If the crank sensor is not working, the engine will not run.
yes but the cam sensor and the crank sensor work to geather so make sure to have it tested if you can to make sure wich is bad .
It does not have a crank case sensor.It does not have a crank case sensor.
A 1995 blazer does not have a crank sensor. SORRY
That year did not have a crank sensor.
3.1L dont have a crank sensor
No, there is no fuse for the crank sensor
Avoid the crank sensor?
it can work! but you need exchange de oil pan, oil pump, timing gear, and timing belt cover! also the ditribuitor, I did already on my 97 Geo , using a 95 motor and it work perfect! sounds complicate but is real ease!
NO. A crank sensor are cam sensor was not introduced until the year 1996.
Sensor failure is often heat related , when crank sensors first start to go out they often have an intermittent failure when the engine is at full operating temperature. You are cooling the sensor with water.