Maybe there's no voltage-source(AC or DC) because voltage is the one that motivates electrons to flow. It could be the connection of components in your circuit.
In the simplest form; The difference between a complete and incopmlete circuit is... Complete means that electricity CAN and WILL flow through it where as with an incomplete circuit does not have the ability to conduct current is broken... Here is an example. -----/----- Incomplete cicuit, something preventing electricity to flow ----------- complete circuit, electricity can flow.
The movement of electron towards the high potential causes electric current to flow in a circuit.
Yes, a switch is a device that stops and starts current flow in a circuit.
In any series circuit, there is one and only one path for current flow. All the current flowing in the circuit will flow through all of the devices in that circuit. A break at any point in the circuit will cause current flow to cease. Lastly, it is current that is the same at any point in the circuit where we'd care to measure it.
An electric circuit.
In the simplest form; The difference between a complete and incopmlete circuit is... Complete means that electricity CAN and WILL flow through it where as with an incomplete circuit does not have the ability to conduct current is broken... Here is an example. -----/----- Incomplete cicuit, something preventing electricity to flow ----------- complete circuit, electricity can flow.
Your question is its own answer.
A circuit must be closed in order for a current to flow because it helps keep a current flow pass. When the switch is closed on a circuit there is a constant flow. When the switches open the flow is disturbed around the circuit.
The circuit is incomplete, you will have no continuity, no flow of current to the load or other components. The voltage across every component in the circuit is zero. No part of the circuit stores or dissipates any energy. In short, the circuit doesn't work.
A circuit must be closed in order for a current to flow because it helps keep a current flow pass. When the switch is closed on a circuit there is a constant flow. When the switches open the flow is disturbed around the circuit.
In a DC circuit . . . resistance. In an AC circuit . . . impedance.
A load increases the flow of electrical current in a series circuit. No load, no flow.
An incomplete circuit is an open circuit; i.e. some part of the circuit isn't connected to anything.Or think of it like this: A circuit is complete when there exists a complete (or closed loop) path for the electrons to flow through it. Also known as a closed circuit. If this is not the case, then it is an incomplete (or open) circuit.
A closed path through which a current can flow is called a circuit. Electric Circuit:)
The name for the status of a circuit that has breaks which electric current that can't flow is called a Closed Circuit. Electric current cannot flow through an open circuit.
Incomplete circuit
In a circuit, the purpose of a switch is to control the current flow to the load by opening the circuit (off) or closing the circuit (on). When the circuit is open, the is no complete loop through which the current can flow. When the switch closes the circuit, it restores the loop, and thus allows the current to flow.