Overheating, yes. Loss of antifreeze, no.
code 43 except2.2or2.5 4flashes pause 3flashes electronic sparkcontrol knock sensor circuit probable cause faulty knock sensor or mem_cal.
yes it can. also check knock sensor and the wire going to it
No it will not. The knock sensor is used to adjust the timing.
Nope prob leaking freeze plug
No, a faulty knock sensor will cause a code 43 normally. check for spark, diconnect a wire from a plug, install a plug in the wire, lay it on something metal, have an assistant crank the motor and watch for spark...
remove the sensor, backprobe the plug with a multimeter set on voltage, tap the knock sensor lightly with a spanner, you should see voltage respond by increasing whenever you tap it, this means your knock sensor is working correctly. if it does not move however it means that the sensor is faulty.
Could be a bad knock sensor. The ECM may be retarding the timing based on bad input from a faulty knock sensor.
yes when it is not working properly
A faulty knock sensor can certainly cause misfiring and engine pinging.
No it will not.
Pulse signals from what? speed sensor abs wheel sensor fuel pump pressure sensor crankshaft sensor camshaft sensor knock sensor