Yes, because all manufactures figure in a minimal safety factor in order to pass UL code for people who don't follow recommended applications. <<>> A 130 volt bulb will not be as bright as a comparable bulb of the same wattage on 120 volts. Traffic signal light bulbs have a 130 volt rating. Used on 120 volt systems the bulbs last much longer because that are rated for a higher voltage. This bulb will gradually be replaced by LED lamps which have a much more significant life span.
What needs to be checked is the voltage of the low voltage line. If it is 120 v, that is suitable for a 120 v LED fitting. Second, is the line capable of carrying the current needed by the fixture. The answer to that is, probably, but it still needs checking.
It should work okay.
You don't. The output of a ballast is for one purpose only and that is to operate the lamp that is designed for that ballast. You should be careful with high output ballasts as they can draw enough milliamps to lock your muscles up if the current is shorted through you.
Depends on the size of the LED light and the voltage applied. An example is an LED 24 volt globe light that pulls 8 watts which draw 0.333333 amps. Take an LED 120 volt light bulb draws 12 watts and will pull 0.1 amps. The same bulb at 240 volts wil draw 0.05 amps. it really depends on the watts and voltage applied. An average would be about 0.1 amps.
Yes, as long as it has a filament for producing light for example a Tungsten Halogen Lamp, normal Incandescent or GLS lamp. If the lamp is rated at 12v it will run on either 12vac or 12vdc.
I recommend 120 volt 20 watt halogen if you are on a budget. If you can afford them 120 volt LED is even better and will last for years.
It is drawing .06 amps.
Yes, because all manufactures figure in a minimal safety factor in order to pass UL code for people who don't follow recommended applications. <<>> A 130 volt bulb will not be as bright as a comparable bulb of the same wattage on 120 volts. Traffic signal light bulbs have a 130 volt rating. Used on 120 volt systems the bulbs last much longer because that are rated for a higher voltage. This bulb will gradually be replaced by LED lamps which have a much more significant life span.
What needs to be checked is the voltage of the low voltage line. If it is 120 v, that is suitable for a 120 v LED fitting. Second, is the line capable of carrying the current needed by the fixture. The answer to that is, probably, but it still needs checking.
No but it is not clear where 300 v consumer lights can be bought anyway.
Assumption that this is a incandescent filament style - 120v will be cooler as it's drawing less amps watts divided by volts = amps for a less hot lamp you'd need to shift Technologies to flurescent or LED
similarity between lamp and LED- lamp in simple current is used to show that current is flowing and LED performs the same task but in electronic circuit .difference between lamp and LED-lamp in simple current is used to show that current is flowing and LED performs the same task more efficiently but in electronic circuit . so LED works more efficiently in electronic circuit than lamp which performs task in simple circuit.
Consider an LED desk lamp to get all of the benefits of a traditional desk lamp with a low power bulb that will take many years to burn out. LED lamps are a great value.
It should work okay.
You don't. The output of a ballast is for one purpose only and that is to operate the lamp that is designed for that ballast. You should be careful with high output ballasts as they can draw enough milliamps to lock your muscles up if the current is shorted through you.
Depends on the size of the LED light and the voltage applied. An example is an LED 24 volt globe light that pulls 8 watts which draw 0.333333 amps. Take an LED 120 volt light bulb draws 12 watts and will pull 0.1 amps. The same bulb at 240 volts wil draw 0.05 amps. it really depends on the watts and voltage applied. An average would be about 0.1 amps.