answersLogoWhite

0

The rotors swell(rust) around the hub. A puller would work if you could get it around the rotor. A big hammer will get them of with some effort. You may damage the hub as well but Ford wants you to so you will have to buy new ones.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

What is the front leg room in the 2003 Ford Escape?

The 2003 Ford Escape has 41.6 in. of front leg room.


What is the front hip room in the 2003 Ford Escape?

The 2003 Ford Escape has 53.4 in. of front hip room.


What is the front shoulder room in the 2003 Ford Escape?

The 2003 Ford Escape has 56.3 in. of front shoulder room.


What is the front head room in the 2003 Ford Escape?

The 2003 Ford Escape has 40.4 in. of front head room.


What is the front track of the 2003 Ford Escape?

The front track of the 2003 Ford Escape is 5 ft. 1.2 in. (61.2 in.).


Is the 2003 Ford Escape front wheel drive rear wheel drive or four wheel drive?

The 2003 Ford Escape has front wheel drive.


How do you replace the front rotors on 2003 ford escape?

To replace the front rotors on a 2003 Ford Escape, start by loosening the lug nuts on the front wheels and lifting the vehicle with a jack. Remove the wheel and then detach the caliper by unscrewing the caliper bolts; suspend it with a wire to avoid strain on the brake line. Next, remove the caliper bracket and the old rotor, then install the new rotor and reassemble the caliper and bracket. Finally, replace the wheel, tighten the lug nuts, and lower the vehicle.


What bulb is needed for a 2003 ford escape fog light?

The 2003 Ford Escape Owner Guide shows : ( Foglamp , front , # 898 bulb )


Where on a 2003 Ford Escape is the number 2 cylinder?

On the 3.0 L - DOHC - V6 engine in a 2003 Ford Escape : firewall 1---2---3 4---5---6 front of Ford escape


What is the minimum brake rotor thickness for a 2003 Ford Excursion?

Got these from ford last night for an 03 7.3L 2WD DISCARD at: Front rotors 1.417 Rear rotors 1.010


Ford Escape number 3 coil pack in front or back for 2003?

1-----2-----3 4-----5-----6 front of Ford Escape ( with V6 engine )


What wrench size for a 2003 Ford Escape brake caliper bolt?

The calipers need a 7 mm hex wrench. The Caliper holder to remove the rotors takes an 18mm socket. This is a 2003 Ford escape..apparently it's the same as a Mazda tribute.